Tekirdağ Bağcılık Araştırma Enstitüsü Üzüm Suyu İşleme Tesis Çatısına Uygulanabilecek Fotovoltaik Tasarımların Teknik, Ekonomik ve Çevresel Açılardan Analizi

Basit Öğe Kaydı
dc.authorscopusid57219547589
dc.authorscopusid20336671700
dc.contributor.authorEremkere, M.
dc.contributor.authorAktaş, Türkan
dc.date.accessioned2022-05-11T14:43:48Z
dc.date.available2022-05-11T14:43:48Z
dc.date.issued2020
dc.departmentFakülteler, Ziraat Fakültesi, Biyosistem Mühendisliği Bölümü
dc.description.abstractRenewable energy sources should be expanded instead of fossil energy sources due to their environmental damage and exhaustion property. Especially, unused roof areas in agricultural production plants are good options for electricity generation using PV panels. In this research; theoretical, practical and technical solar energy potentials were determined; the amount of electricity that can be produced and carbon emission amounts that can be reduced by PV panels were found using PVsyst and RETScreen software in 6 different designs for the roof area of Grape Products Processing Plant in Tekirdag Viticulture Research Institute. The average consumed energy during grape juice production period was determined as 4059,822 kWh. As a result of this research, the technical solar energy potential was found as 1543 kWh/m2 annually with acceptance of panel angle as 20? and the azimuth angle as 0?. Performance ratios for monocrystalline (mono-si), polycrystalline (poly-si) and amorfcrystalline (a-si) PV system designs were calculated as 85,15%-84,39%-80,40% while annual electricity generation values were calculated as 1219-1280-1291 kWh/kWp/year, respectively. It was seen that greenhouse gas reductions can be achieved as 10.9 tCO2/year in case of generation of 23.1 MWh electricity per year (mono-si); 10.5 tCO2 /year in case of 22.4 MWh electricity generation (poly-si) and 4.9 tCO2 /year in case of 10.3 MWh electricity generation (a-si). It was found that designs using a-si panel type are not suitable due to the limited roof area of the plant while designs using mono-si and poly-si panels provide approximate outputs in terms of cost and efficiency. © 2020, TUBITAK. All rights reserved.
dc.identifier.doi10.31202/ecjse.636966
dc.identifier.endpage294
dc.identifier.issn2148-3736
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85095937531
dc.identifier.scopusqualityQ4
dc.identifier.startpage275
dc.identifier.urihttps://doi.org/10.31202/ecjse.636966
dc.identifier.urihttps://hdl.handle.net/20.500.11776/9730
dc.identifier.volume7
dc.indekslendigikaynakScopus
dc.institutionauthorEremkere, M.
dc.institutionauthorAktaş, Türkan
dc.language.isotr
dc.publisherTUBITAK
dc.relation.ispartofEl-Cezeri Journal of Science and Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectEnergy feasibility
dc.subjectGreenhouse gas emission
dc.subjectPhotovoltaic system design
dc.subjectPVsyst
dc.subjectRETScreen
dc.titleTekirdağ Bağcılık Araştırma Enstitüsü Üzüm Suyu İşleme Tesis Çatısına Uygulanabilecek Fotovoltaik Tasarımların Teknik, Ekonomik ve Çevresel Açılardan Analizi
dc.title.alternativeAnalysis of technical, economic and environmental aspects of photovoltaic designs: A case study on tekirdag viticulture research institute grape juice processing building roof
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
9730.pdf
Boyut:
1.8 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu
Ziraat Fakültesi Koleksiyonu