Mechanical properties of plastic matrix composite materials used in tractor bonnets

Basit Öğe Kaydı
dc.authorid0000-0003-4422-8552
dc.authorscopusid35306497600
dc.authorscopusid6505464111
dc.authorscopusid7101877762
dc.authorwosidEKER, BÜLENT/AAA-1914-2021
dc.authorwosidEKER, BÜLENT/AAH-4987-2019
dc.contributor.authorBecenen, Nilgün
dc.contributor.authorEker, Bülent
dc.contributor.authorŞahin, Mumin
dc.date.accessioned2022-05-11T14:45:18Z
dc.date.available2022-05-11T14:45:18Z
dc.date.issued2010
dc.departmentFakülteler, Ziraat Fakültesi, Tarım Makinaları Bölümü
dc.description.abstractThe effects of chemical structure of the resin, reinforcement types, material thickness, and post-cure treatment on the mechanical properties of composite material were examined in this study. Composite materials were produced by combining chopped, woven, and felt glass fibers with thermoset plastic-based matrixes. Orthophtalic polyester (polives 701) and bisphenol-A epoxy vinyl ester (polives3401) resins were chopped in combination with a catalyst system composed of MEK-PEROKSIT and cobalt, and were reinforced with chopped, woven, and felt glass fiber. Composite materials were prepared using a hand lay-up method. Half of the prepared composite materials were post-cured, the other half remained non-treated. A total of 75 tests were performed. Tensile, bending, impact, and hardness tests were performed to determine the mechanical properties of the samples. The test results indicated that durable and strong tractor bonnets can be produced using vinyl ester-based matrix material and 90 degrees glass fiber woven reinforcement material, producing two-layered composite material and curing at 50 degrees C, 80 degrees C, and 110 degrees C.
dc.identifier.doi10.1177/0731684410386990
dc.identifier.endpage3644
dc.identifier.issn0731-6844
dc.identifier.issn1530-7964
dc.identifier.issue24en_US
dc.identifier.scopus2-s2.0-78650363740
dc.identifier.scopusqualityQ1
dc.identifier.startpage3637
dc.identifier.urihttps://doi.org/10.1177/0731684410386990
dc.identifier.urihttps://hdl.handle.net/20.500.11776/10001
dc.identifier.volume29
dc.identifier.wosWOS:000285243700010
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorEker, Bülent
dc.language.isoen
dc.publisherSage Publications Ltd
dc.relation.ispartofJournal of Reinforced Plastics and Composites
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectplastic matrix composites
dc.subjectresins
dc.subjectmechanical properties
dc.subjectVinyl-Ester
dc.subjectGlass-Fiber
dc.subjectResin
dc.subjectBehavior
dc.subjectVehicle
dc.titleMechanical properties of plastic matrix composite materials used in tractor bonnets
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
1001.pdf
Boyut:
121.03 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
Ziraat Fakültesi Koleksiyonu