Development of a chopper unit for chopping of sunflower stalk during harvesting by combine harvester

Basit Öğe Kaydı
dc.authorscopusid36023221800
dc.authorscopusid14119898600
dc.authorscopusid56031178300
dc.authorscopusid24802666300
dc.authorscopusid35111925400
dc.authorscopusid55989411800
dc.contributor.authorDalmış, İbrahim Savaş
dc.contributor.authorKayişoğlu, Birol
dc.contributor.authorBayhan, Yılmaz
dc.contributor.authorÜlger, Poyraz
dc.contributor.authorToruk, F.
dc.contributor.authorDurgut, F.
dc.date.accessioned2022-05-11T14:14:13Z
dc.date.available2022-05-11T14:14:13Z
dc.date.issued2013
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.departmentFakülteler, Ziraat Fakültesi, Biyosistem Mühendisliği Bölümü
dc.description.abstractThe aim of this research was the development of a chopping unit, which is placed under the header of a combine harvester. In this way, stalks can be chopped during harvesting and this will be useful in respect to saving time, labor, and energy. In addition, field traffic will decrease by using this unit.The alternative chopping unit may replace the conventional methods. For this objective, the developed chopping unit was tested in three different types of chopping methods. These methods were called Machine 1, Machine 2 and Machine 3. All methods were tested with two and three blade modules. The best results were obtained with 3 flat blades modules on Machine-2. While the average stalk size of Machine-2 was 14 cm, this value was 9.6 cm in 3 flat blades. With this machine the surface covering rate was 26.25%, the average height of stalk was 11.53 cm. This paper describes the structural features of the machine, the design of the main working parts, determination of the parameters of the position of the blade modules, and presents the performance tests.
dc.identifier.endpage1154
dc.identifier.issn1310-0351
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-84893778313
dc.identifier.scopusqualityQ3
dc.identifier.startpage1148
dc.identifier.urihttps://hdl.handle.net/20.500.11776/5830
dc.identifier.volume19
dc.indekslendigikaynakScopus
dc.institutionauthorDalmış, İbrahim Savaş
dc.institutionauthorKayişo?lu, Birol
dc.institutionauthorBayhan, Yılmaz
dc.institutionauthorÜlger, Poyraz
dc.institutionauthorToruk, F.
dc.institutionauthorDurgut, F.
dc.language.isoen
dc.relation.ispartofBulgarian Journal of Agricultural Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectChopping
dc.subjectChopping blade
dc.subjectSunflower stalk
dc.titleDevelopment of a chopper unit for chopping of sunflower stalk during harvesting by combine harvester
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
5830.pdf
Boyut:
712.46 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Ziraat Fakültesi Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu