Effect of different sintering conditions on microstructural characterisation of Co-Cr metal laser powder
Özet
Co-Cr alloys have been used for many years in dentistry. In recent years, the fabrication of prosthetic restorations from Co-Cr alloys by metal laser sintering method has become widespread. This method is a combination of powder metallurgy and three-dimensional printing technologies. The surface microstructure of the material and the different phases formed on the surface of the material after sintering and heat treatment are extremely important since these metal substructures are layered with dental porcelain in fixed prosthetic dentistry. In this study, characterisation of Co-Cr alloy samples produced by direct metal laser sintering (DMLS) method and sintering under various atmospheric conditions were performed with X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy-dispersive X-ray diffractometer (EDX). It was observed that sintering with different methods under various atmospheric conditions affected the XRD phase intensities. The sintering in the argon gas atmosphere yielded a more significant phase separation that facilitates the identification of different phases in XRD patterns. Copyright © 2020 Inderscience Enterprises Ltd.
Cilt
15Sayı
1Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Evaluation of corrosion resistance of Co-Cr alloys fabricated with different metal laser sintering systems
Tuna, Süleyman Hakan; Karaca, Erhan; Aslan, İsmail; Pekkan, Gürel; Özçiçek Pekmez, Nuran (Korean Academy of Prosthodontic, 2020)PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND ... -
Improvement of metallurgical properties of A356 aluminium alloy by AlCrFeSrTiBSi master alloy
Teker, T.; Yılmaz, Serdar Osman; Karakoca, Alper (Walter de Gruyter GmbH, 2023)A new AlCrFeSrTiBSi master alloy was manufactured by in situ synthesis in Al melt, and compared with AlBSr master alloy. Microstructures of A356 alloy modified with AlCrFeSrTiBSi master alloy were investigated, and the ... -
Fabrication, characterization, and in vivo biocompatibility evaluation of titanium-niobium implants
Yolun, Abdurrahman; Şimşek, Murat; Kaya, Mehmet; Elibol Annaç, Ebru; Köm, Mustafa; Çakmak, Ömer (SAGE Publications Ltd, 2021)In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was ...