Improvement of metallurgical properties of A356 aluminium alloy by AlCrFeSrTiBSi master alloy
Özet
A new AlCrFeSrTiBSi master alloy was manufactured by in situ synthesis in Al melt, and compared with AlBSr master alloy. Microstructures of A356 alloy modified with AlCrFeSrTiBSi master alloy were investigated, and the structural details of the new cast A356 alloy were evaluated by X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), microhardness and differential thermal analysis (DTA). AlBSr master alloy typically formed ?-Al and granular SrB6 phases in A356, and the samples inoculated with AlCrFeSrTiBSi master alloy consisted of additionally AlCrFeSi phase with irregular blocks. The addition of 0.1 wt%AlCrFeSrTiBSi alloy to the A356 alloy significantly refined and modified the grain structure together. The structure of eutectic Si converted from acicular form to fibrous. The size of ?-Al dendrites declined from ?1000 ?m to ?100 ?m. The strength values of the A356 alloy were developed by ?70% with the addition of 0.1 wt%AlCrFeSrTiBSi master alloy. © 2022 Walter de Gruyter GmbH, Berlin/Boston.
Cilt
65Sayı
2Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Fabrication, characterization, and in vivo biocompatibility evaluation of titanium-niobium implants
Yolun, Abdurrahman; Şimşek, Murat; Kaya, Mehmet; Elibol Annaç, Ebru; Köm, Mustafa; Çakmak, Ömer (SAGE Publications Ltd, 2021)In this study, biocompatible titanium-niobium (Ti-Nb) alloys were fabricated by using powder metallurgy methods. Physical, morphological, thermal, and mechanical analyses were performed and their in vivo compatibility was ... -
Effect of different sintering conditions on microstructural characterisation of Co-Cr metal laser powder
Pekkan, Gürel; Taşçı, Eda; Pekkan, Keriman; Ispalarlı, Murat (Inderscience Publishers, 2020)Co-Cr alloys have been used for many years in dentistry. In recent years, the fabrication of prosthetic restorations from Co-Cr alloys by metal laser sintering method has become widespread. This method is a combination of ... -
A study on the phase transformation behaviour of Cu-20wt.Sn alloy produced using powder metallurgy method: Experimental and molecular dynamics modelling
Özel, Serkan; Çelik, Fatih Ahmet; Kaya, Mehmet (Elsevier B.V., 2020)In this study, Cu-20wt.Sn alloy was produced by powder metallurgy (PM) method by using high purity element powders. The phases in the microstructure of the produced alloy were determined by XRD study. The phase transformation ...