Yayıncı "Techno-Press" için listeleme
Toplam kayıt 10, listelenen: 1-10
-
Application of AI models for predicting properties of mortars incorporating waste powders under Freeze-Thaw condition
(Techno-Press, 2022)The usability of waste materials as raw materials is necessary for sustainable production. This study investigates the effects of different powder materials used to replace cement (0%, 5% and 10%) and standard sand (0%, ... -
Application of Al models for predicting properties of mortars incorporating waste powders under Freeze-Thaw condition
(Techno-Press, 2022)The usability of waste materials as raw materials is necessary for sustainable production. This study investigates the effects of different powder materials used to replace cement (0%, 5% and 10%) and standard sand (0%, ... -
Bond strength of reinforcement in splices in beams
(Techno-Press, 2003)The primary aim of this study was to investigate the bond strength between reinforcement and concrete. Large sized nine beams, which were produced from concrete with approximately f(c)(')= 30 MPa, were tested. Each beam ... -
Comparison of TiO2 and ZnO catalysts for heterogenous photocatalytic removal of vancomycin B
(Techno-Press, 2018)Continuous input into the aquatic ecosystem and persistent structures have created concern of antibiotics, primarily due to the potential for the development of antimicrobial resistance. Degradation kinetics and mineralization ... -
Cost minimization of prestressed steel trusses considering shape and size variables
(Techno-Press, 2015)There are many studies on the optimization of steel trusses in literature; and, a large number of them include a shape optimization. However, only a few of these studies are focused on the prestressed steel trusses. ... -
Enhancement of Methylene Blue dye adsorption by Fe-Hydroxyapatite composite
(Techno-Press, 2016)Synthesized hydroxyapatite (Hyd) and Fe-hydroxyapatite (Fe-Hyd) composite were used for the removal of Methylene Blue (MB) from aqueous solutions in this study. The effect of adsorbent amount, pH and initial MB concentration ... -
Evaluation of effects of textile wastewater on the quality of cotton fabric dye
(Techno-Press, 2017)In this study, reuse of biologically treated wastewater of denim washing and dyeing industry has been evaluated by membrane technologies. After that experiments were carried out at laboratory scale in textile dyeing unit ... -
Optimization of methylene blue adsorption by pumice powder
(Techno-Press, 2015)The main objective of this study is to evaluate adsorptive removal of Methylene Blue (MB) dye from aqueous solution using pumice powder. The effects of pH, adsorption time, agitation speed, adsorbent dose, and dye ... -
Synthesis of magnetite iron pumice composite for heterogeneous Fenton-like oxidation of dyes
(Techno-Press, 2020)The removal of two dyes, namely Methylene Blue (MB) and Reactive Brillant Red (RR) from aqueous solution was investigated using magnetite iron coated pumice (MIP) composite in the Fenton-like oxidation process. A weight ... -
Vibration of axially functionally graded nano rods and beams with a variable nonlocal parameter
(Techno-Press, 2018)Vibration of axially functionally graded nano-rods and beams is investigated. It is assumed that the material properties change along the rod and beam length. The Ritz method with algebraic polynomials is used in the ...