Application of AI models for predicting properties of mortars incorporating waste powders under Freeze-Thaw condition
Özet
The usability of waste materials as raw materials is necessary for sustainable production. This study investigates the effects of different powder materials used to replace cement (0%, 5% and 10%) and standard sand (0%, 20% and 30%) (basalt, limestone, and dolomite) on the compressive strength (fc), flexural strength (fr), and ultrasonic pulse velocity (UPV) of mortars exposed to freeze-thaw cycles (56, 86, 126, 186 and 226 cycles). Furthermore, the usability of artificial intelligence models is compared, and the prediction accuracy of the outputs is examined according to the inputs (powder type, replacement ratio, and the number of cycles). The results show that the variability of the outputs was significantly high under the freeze-thaw effect in mortars produced with waste powder instead of those produced with cement and with standard sand. The highest prediction accuracy for all outputs was obtained using the adaptive-network-based fuzzy inference system model. The significantly high prediction accuracy was obtained for the UPV, fc, and fr of mortars produced using waste powders instead of standard sand (R2 of UPV, fc and ff is 0.931, 0.759 and 0.825 respectively), when under the freeze-thaw effect. However, for the mortars produced using waste powders instead of cement, the prediction accuracy of UPV was significantly high (R2=0.889) but the prediction accuracy of fc and fr was low (R2fc=0.612 and R2ff=0.334). Copyright © 2022 Techno-Press, Ltd.
Cilt
29Sayı
3Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Investigation of Properties of Mortars Containing Waste Stone Powder Instead of Sand under Freezing-Thawing Effect
Aral, İbrahim Feda; Cihan, Mehmet Timur (Institute of Physics Publishing, 2019)Nowadays, sustainable production is vitally important in consideration of limited raw materials and an environmental welfare. Sustainable production encourages the use of several industrial wastes as raw materials in ... -
Application of Al models for predicting properties of mortars incorporating waste powders under Freeze-Thaw condition
Cihan, Mehmet Timur; Aral, İbrahim Feda (Techno-Press, 2022)The usability of waste materials as raw materials is necessary for sustainable production. This study investigates the effects of different powder materials used to replace cement (0%, 5% and 10%) and standard sand (0%, ... -
Effects of freeze-thawing cycles on the physical and mechanical properties of basaltic and dolomitic rocks evaluated with a decay function model
Aral, İbrahim Feda; Boy, Ramiz; Dinçer, Ali Rıza (Springer Science and Business Media Deutschland GmbH, 2021)Basalts from Çorlu Karatepe and dolomite from Kırklareli subjected to freeze-thawing (F-T) cycles were studied, and the resulting changes were analyzed. The unweathered rocks and those subjected to 50 F-T cycles after every ...