Bölüm "Fakülteler, Çorlu Mühendislik Fakültesi, Tekstil Mühendisliği Bölümü" Çorlu Mühendislik Fakültesi Koleksiyonu için listeleme
Toplam kayıt 178, listelenen: 81-100
-
Huarizo Liflerinin Özelliklerinin İncelenmesi
(2017)Lama ve alpaka liflerinin incelik, uzunluk gibi fiziksel özellikleri ile pul yapısı, 100 mikrondaki pul sayısı, pul kalınlığı gibi yüzey özellikleri literatürde pek çok çalışmada geniş ölçüde incelenmiş olsa da, Huarizo ... -
The impact of tomato fruits containing multi-walled carbon nanotube residues on human intestinal epithelial cell barrier function and intestinal microbiome composition
(Royal Soc Chemistry, 2019)Carbon nanomaterials (CNMs) can positively regulate seed germination and enhance plant growth. However, clarification of the impact of plant organs containing absorbed CNMs on animal and human health is a critical step of ... -
Improvement of the Environmental Permit and License Application Process in Turkey
(2021)Improvement on the environmental permit application that has been put into force since 2014 by the By Law on Environmental Permit and License (BLEPL) in Turkey has been achieved through a project realized by the Ministry ... -
Improving the Breaking and Tear Strength of Cotton Fabric Using BTCA and CA Crosslinkers
(2021)Polycarboxylic acids are used as crosslinking agents with sodium hypophosphite which do not containformaldehyde. In this study, breaking strength, breaking elongation and tear strength of cotton(twillweave)fabric samples ... -
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ... -
Inclusion complexes of beta-cyclodextrine with Fe3O4@HA@Ag Part I: Preparation and characterization
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2019)In this study, the preparation of inclusion complexes according to kneading and physical mixing techniques at 1:1 and 1:2 (guest:host) mass ratios of Fe3O4@HA@Ag and beta-cyclodextrin were studied. Fourier transformed ... -
Investigating the usage possibility of metal mono carboxylates(metal naphthenates) as antibacterial agent in textile applications
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2014)In this study, it was aimed to produce a substance, which could be used as an antibacterial agent in textiles, from petroleum sub-products in order to extend the use of petroleum and petroleum sub-products in textiles. For ... -
Investigation of Flame Retardancy Effect of Licorice Root Extract on Cotton and Cotton-Polyester Blended Fabrics
(2022)In this study; licorice root, which is a sustainable natural material with a low environmental waste load, is used as an alternative fire retardant (FR) material. Flammable retardancy properties of 100% cotton and 50% ... -
Investigation of the durability and stability of piezoelectric textile fibres
(Sage Publications Ltd, 2017)Polymers such as polyvinylidene difluoride, polypropylene and polyamide-11 show great promise for providing lightweight, flexible and fibrous piezoelectric materials that can be integrated into technical textile fabric ... -
Investigation of the dyeing characteristics of alpaca fibers (Huacaya and Suri) in comparison with wool
(Sage Publications Ltd, 2015)Luxury fibers have great importance in the field of high added value fabric production, but the studies related to these fibers are very limited. One of these luxury proteinous fibers is alpaca wool. In this study, dyeing ... -
THE INVESTIGATION OF THE EFFECT OF CHEMICAL MODIFICATION WITH CHITOSAN TO PROVIDE SINGLE BATH DYEABILITY OF NYLON / COTTON BLEND FABRICS
(Chamber of Textile Engineers, 2022)In this study, it was aimed to make each fiber components dyeable with a single dyestuff so that nylon / cotton blend fabrics can be dyed in the same bath. For this purpose, it was aimed to make each of these fibers dyeable ... -
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ... -
Investigation of the Effect of Weft Yarn Parameters on the Elasticity and Recovery Properties of Stretch Denim Fabrics
(Bellwether Publishing, Ltd., 2021)The aim of this study was to examine the effect of weft yarn parameters on the elasticity and recovery properties of stretch denim fabrics. For this purpose, frequently used denim fabric was taken as a reference point, and ... -
Investigation of the Quality Characteristics of Wool Obtained from Karacabey Merino Sheep Grown in Thrace Region-Turkey
(Taylor & Francis Inc, 2020)In this study 34 heads of Karacabey Merino sheep wools raised in various farms located around Tekirdag province, Turkey were investigated. Physical wool properties such as fiber fineness, length, strength, elongation, and ... -
Investigation of the Treatment of Textile Wastewater with Cold Atmospheric Plasma Reactor (Profoks) and Reuse of Recycled Water in Reactive Dyeing Process of Cotton
(Taylor & Francis Inc, 2020)In this study, Profoks reactor (Cold Atmospheric Plasma reactor based on Dielelectric Barrier Discharge) was used for the treatment of textile wastewater and then the usability of the recycled water in the reactive dyeing ... -
Investigation of the usage possibility of copper cyclohexane monocarboxylate (copper naphthenate) as a textile dye
(Inst Natl Cercetare-Dezvoltare Textile Pielarie-Bucuresti, 2012)In this study, usage possibility of naphthenates, which is known as saturated hydrocarbons present in the chemical composition of grease obtained from the handling of petrol, as a dye in textile industry was investigated. ... -
Investigation of Thermal Conductivity and Sound Absorption Properties of Rice Straw Fiber/Polylactic Acid Biocomposite Material
(Taylor & Francis Inc, 2022)In the last decade, there has been an increasing trend in the use of agricultural wastes as reinforcements for high value-added composite materials as an ecological approach. In our previous study, a nonwoven fabric was ... -
An Investigation on the Effect of Bottom Layer Material on the Voltage Output of A Piezoelectric Smart Woven Structure
(Ege Univ, 2018)In this work, the voltage output of a 2-dimensional (2D) woven fabric produced by using polyvinylidene fluoride-based (PVDF) piezoelectric filaments into a plain woven fabric structure was studied. Piezoelectric PVDF ... -
An investigation on the effect of bottom layer material on the voltage output of a piezoelectric smart woven structure
(Ege Universitesi, 2018)In this work, the voltage output of a 2-dimensional (2D) woven fabric produced by using polyvinylidene fluoride-based (PVDF) piezoelectric filaments into a plain woven fabric structure was studied. PiezoelectricPVDF filaments ... -
Investigation on the Effect of Draw Ratio on Voltage Outputs of Polarised Isotactic Polypropylene Monofilaments
(Chamber of Textile Engineers, 2016)Piezoelectric isotactic polypropylene (iPP) monofilaments were prepared by drawing and poling on a laboratory scale melt extruder. Results showed that the filament properties are affected by the drawing ratio. As expected, ...