Ara
Toplam kayıt 2561, listelenen: 481-490
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
(Aalborg Univ Press, 2015)
The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ...
Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron
(Elsevier Science Sa, 2016)
Hypereutectic high chromium white cast iron alloys were produced with TiBAl (1-3 wt.%) inoculants. The heat treatments were applied to the samples as 1000 degrees C for 1 and 2 h. The microstructures of the samples were ...
Finite element modelling of crackable connecting rods at fracture splitting process
(Kaunas Univ Technol, 2015)
In this study crack propagation analysis of impulsively loaded connecting rods with different microstuctures namely perlitic, bainitic, tempered martensitic were studied numerically for evaluation of fracture parameters. ...
The Effects of Microwave Energy to the Drying of Apple (Gala) Slices
(2017)
In this work, the drying behaviors of apple slices with 2, 4, and 6mm thickness were investigated in a microwave conveyor dryer.The effects of different microwave power levels (1050 W, 1500 W and 2100 W) and conveyor speeds ...
Investigation of Drying Kinetics of Zucchini using Microwave Energy
(2017)
Bu çalışmada mikrodalga konveyör kurutucu kullanarak kabak dilimlerinin kuruma davranışı araştırılmıştır. Kuruma deneyleri 5 mm, 10 mm ve 15 mm dilim kalınlıklarında, 1,5 kW ve 2,1 kW güçlerinde gerçekleştirildi. Elde ...
Forced vibration analysis of functionally graded beams using nonlocal elasticity
(Elsevier Sci Ltd, 2013)
A forced vibration analysis of functionally graded (FG) nanobeams is considered based on the nonlocal elasticity theory. The solution is obtained by using Navier method for various shear deformation theories. The material ...
Three dimensional mechanical buckling of FG plates with general boundary conditions
(Elsevier Sci Ltd, 2013)
The mechanical buckling analysis of rectangular functionally graded plates under different axial loadings is considered. The analysis is based on the small strain elasticity theory with different boundary conditions. The ...
Three dimensional shear buckling of FG plates with various boundary conditions
(Elsevier Sci Ltd, 2013)
In this paper, the buckling of functionally graded plates under shear are considered for various boundary conditions. The buckling results obtained by using Ritz method based on the three-dimensional linear elasticity ...
Determination of optimum operating conditions and simulation of drying in a textile drying process
(Taylor & Francis Ltd, 2013)
In this study, drying behavior of viscose yarn bobbins was investigated experimentally to specify the optimum drying conditions and a drying model was proposed for simulation of drying. The experiments were conducted in a ...
MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, 2014)
The plasma transferred arc (PTA) process was used for developing wear resistance of AISI 430 steel substrate. Appropriate quantities of FeCrC, FeW and FeTi powders were combined to create conditions that synthesized M7C3 ...