A novel approach for composite wear plate fabrication by using vertical centrifugal casting

Basit Öğe Kaydı
dc.authorscopusid57474497200
dc.authorscopusid36023221800
dc.authorscopusid57188561396
dc.contributor.authorÖzkaya, Mustafa
dc.contributor.authorDalmış, İbrahim Savaş
dc.contributor.authorYılmaz, Serdar Osman
dc.date.accessioned2022-05-11T14:26:47Z
dc.date.available2022-05-11T14:26:47Z
dc.date.issued2018
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractA novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal casting. The effect of size and the weight ratio of the carbide particles on wear resistance were investigated. The prepared carbide particles were used as 150-2000 ?m in size and 3-20 g in weight per casting. Spheroidal graphite cast iron has been used as matrix material. During casting, the machine was operated at 250 rpm. The carbide powders have been formed a local coating of 300-1600 µm thickness on the sample tip surfaces. The average thickness of the composite formed on the sample surface was found to be 1000-1200 µm. The elemental distributions were analyzed by EDS. XRD and XPS were used for characterizing the phase structures. The samples were subjected to a "block on ring" abrasive wear test. It has been observed that the abrasion resistance of samples having a powder size of 1000-2000 ?m has the highest abrasion resistance. © 2019 Kauno Technologijos Universitetas. All Rights Reserved.
dc.description.sponsorshipAR.13.18, NKUBAP.00.17
dc.description.sponsorshipThis work was supported by Research Fund of the Tekirdağ Namık Kemal University. Project Number: NKUBAP.00.17.AR.13.18
dc.identifier.doi10.5755/j01.mech.24.6.22473
dc.identifier.endpage839
dc.identifier.issn1392-1207
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-85062207851
dc.identifier.scopusqualityQ4
dc.identifier.startpage833
dc.identifier.urihttps://doi.org/10.5755/j01.mech.24.6.22473
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6594
dc.identifier.volume24
dc.indekslendigikaynakScopus
dc.institutionauthorÖzkaya, Mustafa
dc.institutionauthorDalmış, İbrahim Savaş
dc.institutionauthorYılmaz, Serdar Osman
dc.language.isoen
dc.publisherKauno Technologijos Universitetas
dc.relation.ispartofMechanika
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectAbrasive wear
dc.subjectMetal matrix composites
dc.subjectParticle reinforcement
dc.subjectVertical centrifugal casting
dc.subjectWear plate
dc.subjectAbrasion
dc.subjectAbrasives
dc.subjectCarbides
dc.subjectCast iron
dc.subjectCentrifugal casting
dc.subjectFabrication
dc.subjectMetallic matrix composites
dc.subjectPlate metal
dc.subjectPlates (structural components)
dc.subjectPowder metals
dc.subjectReinforcement
dc.subjectCarbide particles
dc.subjectEffect of sizes
dc.subjectElemental distribution
dc.subjectMatrix materials
dc.subjectParticle reinforcement
dc.subjectSpheroidal graphite cast iron
dc.subjectVertical centrifugal castings
dc.subjectWear plate
dc.subjectWear resistance
dc.titleA novel approach for composite wear plate fabrication by using vertical centrifugal casting
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
6594.pdf
Boyut:
792.89 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu