The Properties of Expanded Polystyrene - Pumice - Gypsum Blocks as a Building Material

dc.authorid30444
dc.authorid9779
dc.contributor.authorŞahin, Sırrı
dc.contributor.authorKaraman, Sedat
dc.date.accessioned2017-06-22T13:54:48Z
dc.date.available2017-06-22T13:54:48Z
dc.date.issued2012
dc.departmentTekirdağ Namık Kemal Üniversitesi Dergileri
dc.description.abstractMost of buildings in rural areas are made out of stone, hollow concrete blocks, adobe(mud bricks), brick and wood. But these materials do not have both sufficiently compressive strengths and thermal conductivity. The aim of this study was to investigate the effect of waste expanded polystyrene (WEPS) and pumice aggregate on strength and thermal conductivity of gypsum blocks. A lot of new wall materials can be made by mixing those materials in different volume fractions. The compressive strength, density, water absorption and thermal conductivity of samples produced were determined. It is observed that these WEPS and pumice gypsum blocks have sufficient strength for their use in general building construction. The thermal insulation properties were quite good as a result of the thermal conductivity tests. This composite material can be suggested for use in building applications as partitions.
dc.description.abstractKırsal yörelerdeki yapıların çoğu taş, beton blok, kerpiç, tuğla ve ahşaptan yapılmıştır. Ancak bu malzemeler yeterli basınç dayanımlarına ve ısı yalıtım özelliklerine sahip değildir. Bu çalışmanın amacı, atık genleştirilmiş polistiren (WEPS) ve pomza agregaların üretilen alçı blokların dayanım ve ısı iletkenlikleri üzerine etkisini araştırmaktır. Bu malzemelerin farklı hacimlerde karıştırılmasıyla birçok yeni duvar malzemeleri yapılabilir. Üretilen örneklerin basınç dayanımı, yoğunluk, su emme ve ısı iletkenlikleri belirlenmiştir. WEPS ve pomza alçı blokların yapılarda kullanımı durumunda yeterli basınç dayanımına sahip olduğu belirlenmiş olup, yapılan ısıl iletkenlik testleri sonucunda ısı yalıtım özellikleri oldukça iyi sonuçlar vermiştir. Elde edilen kompozit malzemelerin bina uygulamalarında iç kısımlarda bölme duvarı olarak kullanılması önerilebilir.
dc.identifier.endpage56
dc.identifier.issue1en_US
dc.identifier.startpage51
dc.identifier.urihttps://hdl.handle.net/20.500.11776/1665
dc.identifier.volume9
dc.language.isoen
dc.publisherNamık Kemal Üniversitesi, Ziraat Fakültesi
dc.relation.ispartofTekirdağ Ziraat Fakültesi Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Başka Kurum Yazarıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectExpanded polystyrene
dc.subjectGypsum
dc.subjectBlocks
dc.subjectPumice
dc.subjectConductivity
dc.subjectStrength
dc.subjectGenleştirilmiş polistiren
dc.subjectAlçı
dc.subjectBloklar
dc.subjectPomza
dc.subjectİletkenlik
dc.subjectbasınç dayanımı
dc.titleThe Properties of Expanded Polystyrene - Pumice - Gypsum Blocks as a Building Material
dc.title.alternativeYapı Malzemesi Olarak Üretilen Genleştirilmiş Polistiren- Pomza -Alçı Karışımlı Blokların Özelliklerinin Araştırılması
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
20120907.pdf
Boyut:
824.46 KB
Biçim:
Adobe Portable Document Format
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.55 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: