Conventional and microwave drying of hydrocarbon cutting sludge
Yükleniyor...
Dosyalar
Tarih
2019
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Wiley
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The purpose of this article is to investigate the drying kinetics and determine the effectiveness of conventional and microwave drying processes for drying of hydrocarbon cutting sludge which is one of the most important waste occurring from petroleum and natural gas cutting activities. Drying experiments of hydrocarbon cutting sludge were performed at MW power levels of 120, 460, and 600 W using microwave dryer and at drying temperatures of 140 degrees C and 180 degrees C. The sample weights were selected as 50, 100, and 150 g. Energy consumption values were determined, according to the microwave power levels, drying temperature, drying times, moisture ratio, as 0.01-0.11 kW/h for microwave, and as 0.11-0.55 kW/h for conventional drying processes. The results showed that the microwave drying was the more effective drying process in terms of drying times and energy consumption. Furthermore, as a result of the statistical analysis, the most suitable model among five drying models was determined according to the chi(2), e(s), and r criteria. (c) 2018 American Institute of Chemical Engineers Environ Prog, 38:e13104, 2019
Açıklama
Anahtar Kelimeler
conventional drying, cutting sludge, energy, microwave drying, moisture, Drill Cuttings, Remediation, Temperature, Particles, Layer, Corn
Kaynak
Environmental Progress & Sustainable Energy
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
38
Sayı
4
