Effect of processing parameters on the properties of two-component injection molded recycled polypropylene/ethylene propylene diene monomer automotive parts

Basit Öğe Kaydı
dc.authoridEkinci, Aysun/0000-0003-0615-8944
dc.authoridAYDIN, Ismail/0000-0002-1592-3102
dc.authoridOKSUZ, Mustafa/0000-0002-1171-3167
dc.authoridAtes, Murat/0000-0002-1806-0330
dc.contributor.authorAl Menen, Busra
dc.contributor.authorEkinci, Aysun
dc.contributor.authorOksuz, Mustafa
dc.contributor.authorAtes, Murat
dc.contributor.authorAydin, Ismail
dc.date.accessioned2024-10-29T17:58:17Z
dc.date.available2024-10-29T17:58:17Z
dc.date.issued2023
dc.departmentTekirdağ Namık Kemal Üniversitesi
dc.description.abstractTwo-component (2K) injection molding of the combination of recycled polypropylene (rPP) and ethylene propylene diene monomer (EPDM) is very promising for automotive industry. Recently, the use of post-industrial wastes in the automotive industry became important in terms of reducing its environmental impacts and circular economy principles. In this study, the effect of processing parameters on the properties of rPP/EPDM deflector parts fabricated by means of a 2K injection molding process was investigated. Post-industrial waste PP was used in varying amounts (0%, 10% and 20% by weight) in rPP/EPDM parts. The properties of aged and unaged rPP/EPDM deflector parts were then compared. The effects of processing parameters on dimensional, mechanical, thermal, and morphological properties of rPP/EPDM parts were investigated by a coordinate measuring device (CMM), scanning electron microscope (SEM), tensile test, and differential scanning calorimetry (DSC) analysis. As a result of the CMM analysis, it was seen that the dimensional stability of the unaged parts was better than the aged parts. The adhesion between rPP and EPDM was found to be dependent on injection temperatures.
dc.description.sponsorshipScientific Research Project Coordination Department of Yalova University [2020/YL/0018]
dc.description.sponsorshipThis research was funded by Scientific Research Project Coordination Department of Yalova University (Project manager: Prof. Dr. Mustafa Oksuz), Grant Number 2020/YL/0018.
dc.identifier.doi10.1007/s00170-023-11512-z
dc.identifier.endpage860
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue45323en_US
dc.identifier.scopus2-s2.0-85160275955
dc.identifier.scopusqualityQ1
dc.identifier.startpage845
dc.identifier.urihttps://doi.org/10.1007/s00170-023-11512-z
dc.identifier.urihttps://hdl.handle.net/20.500.11776/14196
dc.identifier.volume127
dc.identifier.wosWOS:000993026400002
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer London Ltd
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectPP
dc.subjectEPDM
dc.subjectAutomotive plastic
dc.subjectTwo-component injection molding
dc.subjectPost-industrial waste
dc.titleEffect of processing parameters on the properties of two-component injection molded recycled polypropylene/ethylene propylene diene monomer automotive parts
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu