Prediction of Wall Thickness Distribution in Simple Thermoforming Moulds

Basit Öğe Kaydı
dc.authorid0000-0002-2433-6700
dc.authorscopusid56804608100
dc.authorscopusid56805212600
dc.authorwosidEKŞİ, Olcay/ABI-4005-2020
dc.contributor.authorErdoğan, Ertuğrul Selçuk
dc.contributor.authorEksi, Olcay
dc.date.accessioned2022-05-11T14:26:45Z
dc.date.available2022-05-11T14:26:45Z
dc.date.issued2014
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractThermoforming is widely used in manufacturing industries to produce large and labour-intensive products. Compared to other manufacturing techniques, thermoforming is an extremely efficient process that is suitable for high-efficiency mass production. In this paper, experimental thermoforming operations were carried out using a lab-scale, sheet-fed thermo former. Carbon fibre-reinforced PP and unreinforced PS thermoplastic sheets were used in experimental thermoforming operations. The processing parameters were determined for each thermoformed material. Furthermore, a simulation of the thermoforming process was performed using LS-Dyna (TM) software. The thickness distributions obtained from the experiments were compared with the simulation results. The results show that the parameter that most affects the wall thickness distribution is the geometry of the clamping ring. To produce thermoformed products that have a more uniform thickness distribution, the clamping tool geometry must be selected according to the geometry of the product being thermoformed.
dc.identifier.doi10.5545/sv-jme.2013.1486
dc.identifier.endpage202
dc.identifier.issn0039-2480
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-84921064308
dc.identifier.scopusqualityQ3
dc.identifier.startpage195
dc.identifier.urihttps://doi.org/10.5545/sv-jme.2013.1486
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6579
dc.identifier.volume60
dc.identifier.wosWOS:000333068900006
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorEksi, Olcay
dc.language.isoen
dc.publisherAssoc Mechanical Engineers Technicians Slovenia
dc.relation.ispartofStrojniski Vestnik-Journal of Mechanical Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectthermoforming
dc.subjectwall thickness prediction
dc.subjectgeometric element analysis (GEA)
dc.subjectpolystyrene
dc.subjectpolypropylene
dc.titlePrediction of Wall Thickness Distribution in Simple Thermoforming Moulds
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
6579.pdf
Boyut:
1.26 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu