Finite element modelling of crackable connecting rods at fracture splitting process

Basit Öğe Kaydı
dc.authorid0000-0003-2942-378X
dc.authorscopusid57192418883
dc.authorscopusid26431919900
dc.authorwosideruslu, sait özmen/ABA-3618-2020
dc.contributor.authorÖzdemir, Tekin
dc.contributor.authorEruslu, Sait Özmen
dc.date.accessioned2022-05-11T14:26:45Z
dc.date.available2022-05-11T14:26:45Z
dc.date.issued2015
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractIn this study crack propagation analysis of impulsively loaded connecting rods with different microstuctures namely perlitic, bainitic, tempered martensitic were studied numerically for evaluation of fracture parameters. Fracture splitting parameters in experiments for uniform impact force distribution was concerned in numerical analysis. Brittle crack propagation at starting notchs was obtained by impulsive load. Dynamic crack propagation was studied by using two dimensional finite element model and crack tip positions were determined by remeshing algoritm. Dynamic stress intensity factors were calculated by J integral technique and celevage failure was detected according to dynamic fracture toughness parameters by instrumented Charpy impact test. Crack propagation, crack arrest times, cleavege times were found and compared numerically for three different microstructures. Predicted shear effective stress intensity calculations, crack tip velocity, crack extesion results are found supplementary data for experimental fracture parameter optimisation.
dc.identifier.doi10.5755/j01.mech.21.2.7748
dc.identifier.endpage90
dc.identifier.issn1392-1207
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84928261940
dc.identifier.scopusqualityQ4
dc.identifier.startpage85
dc.identifier.urihttps://doi.org/10.5755/j01.mech.21.2.7748
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6582
dc.identifier.wosWOS:000353868700001
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorEruslu, Sait Özmen
dc.language.isoen
dc.publisherKaunas Univ Technol
dc.relation.ispartofMechanika
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectDynamic crack propagation
dc.subjectconnecting rods
dc.subjectfracture splitting
dc.subjectfracture parameters
dc.subjectJ integral
dc.subjectRemeshing Technique
dc.titleFinite element modelling of crackable connecting rods at fracture splitting process
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
6582.pdf
Boyut:
813.57 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu