Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins

Basit Öğe Kaydı
dc.authorscopusid6602300270
dc.authorscopusid6603854266
dc.authorscopusid6506635786
dc.authorscopusid23984042700
dc.contributor.authorKahveci, Kamil
dc.contributor.authorCihan, Ahmet
dc.contributor.authorAkyol, Uğur
dc.contributor.authorAkal, Dinç
dc.date.accessioned2022-05-11T14:26:43Z
dc.date.available2022-05-11T14:26:43Z
dc.date.issued2011
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractIn this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, experimental drying behaviour of bobbins was determined on an experimental dryer setup which was designed and manufactured based on hot-air bobbin dryers used in the textile industry. Drying parameters were drying temperature and bobbin diameter. Then, drying models considered were fitted to the experimentally obtained moisture ratios. The fit was performed by selecting the values for constants in the models in such a way that these values make the sum of the squared differences between the experimental and the model results for moisture ratio minimum. Suitability of fitting was specified as comparing the determination coefficient, standard error and root of mean square deviation. The results show that the most appropriate model in describing the drying curves of polyester bobbins is the Page model.
dc.identifier.endpage784
dc.identifier.issn2010-376X
dc.identifier.scopus2-s2.0-84855252452
dc.identifier.scopusqualityN/A
dc.identifier.startpage781
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6567
dc.identifier.volume78
dc.indekslendigikaynakScopus
dc.institutionauthorAkyol, Uğur
dc.language.isoen
dc.relation.ispartofWorld Academy of Science, Engineering and Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectDrying
dc.subjectMoisture ratio
dc.subjectPage model
dc.subjectPolyester
dc.subjectYarn bobbin
dc.subjectAppropriate models
dc.subjectDetermination coefficients
dc.subjectDrying behaviours
dc.subjectDrying curves
dc.subjectDrying model
dc.subjectDrying parameters
dc.subjectDrying temperature
dc.subjectHot air
dc.subjectHot air drying
dc.subjectModel results
dc.subjectMoisture ratio
dc.subjectMoisture ratios
dc.subjectPage models
dc.subjectRoot of mean squares
dc.subjectSemi-empirical
dc.subjectStandard errors
dc.subjectBobbins
dc.subjectDryers (equipment)
dc.subjectEsters
dc.subjectMoisture
dc.subjectPolyesters
dc.subjectTextile industry
dc.subjectTextile processing
dc.subjectWool
dc.subjectYarn
dc.subjectDrying
dc.titleSuitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu