Zeytin karasuyunun ileri oksidasyon yöntemleriyle arıtımı

dc.contributor.advisorKaykıoğlu, Gül
dc.contributor.authorBalcı, Cemre Nur
dc.date.accessioned2023-04-27T20:40:50Z
dc.date.available2023-04-27T20:40:50Z
dc.date.issued2021
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Çevre Mühendisliği Ana Bilim Dalı
dc.description.abstractZeytinyağı üretimi sonrası oluşan ve arıtılmaksızın alıcı ortamlara deşarj edilmesinin ciddi çevresel tehlikelere sebep olabileceği bilinen atıksuyun arıtımı için ülkemizde uygulanan yaygın bir metot bulunmamaktadır. Zeytin karasuyu olarak adlandıran bu atıksu yüksek miktarda organik maddeler, yağ-gres ve fenolik maddeler içermektedir. Yapılan bu çalışmada zeytin karasuyunun arıtımında çeşitli ön arıtma ve nihai arıtma alternatifleri uygulanmıştır. Ön arıtma uygulaması olarak asit ile parçalama (AP, pH 2'nin altında) ve kireç ile çöktürme (KÇ, 12,5 pH), nihai arıtma uygulaması olarak ise Fenton, Fenton sonrası UVC ve Fenton sonrası ultrases (US) denemeleri gerçekleştirilmiştir. Ön arıtma çalışmaları sonucunda kireç ile çöktürme uygulamasının asit kullanılarak yapılan parçalama işleminden daha başarılı olduğu tespit edilmiştir. Bu iki yöntemin KOİ, yağ-gres, TOK ve fenolik maddelerin giderim verimleri kireç ile ön çöktürme için sırasıyla %52, %99,7, %42 ve %13 olarak asit ile parçalanma için ise sırasıyla %43, %89, %30, %0,30 olarak tespit edilmiştir. KÇ+Fenton ve AP+Fenton uygulamalarında belirlenen optimum şartlarda KOİ, yağ-gres ve TOK giderim verimleri sırasıyla %75, %99,3, %62 ve %66, %99,4, %42 olarak belirlenmiştir. Buna göre, Fenton uygulamasından önce KÇ ön arıtma uygulaması, AP'ya göre daha başarı sonuçlar vermiştir. KÇ+Fenton+UV ve KÇ+Fenton+US uygulamaları ile elde edilen KOİ giderme verimleri sırasıyla %78 ve %90 olmaktadır. Aynı şekilde AP+Fenton+UV ve AP+Fenton+US için KOİ giderme verimleri sırasıyla %54 ve %77 olarak belirlenmiştir. US uygulamasının KOİ giderme verimleri açısından daha başarılı sonuçlar verdiği görülebilmektedir. Bununla birlikte, KÇ+Fenton+US ve AP+Fenton+US uygulaması sonucunda KOİ, yağ-gres ve TOK giderme verimleri sırasıyla %90, %98,5, %67 ve %77, %98,4 ve %64 olarak belirlenmiştir. En iyi giderme veriminin elde edildiği KÇ+Fenton+US uygulaması sonucunda KOİ konsantrasyonunun 10.600 mg/L olduğu belirlenmiştir. Yapılan çalışma sonucunda elde edilen atıksu, yağı giderilmiş ve anaerobik arıtma tesisine verilmeye uygun hale getirilmiş olmakla birlikte, uygulanan proseslerin ön arıtım sistemi olarak değerlendirilmesinin nihai arıtma tesisi için avantajlar sağlayabileceği öngörülmektedir.
dc.description.abstractThere is no common method applied in our country for the treatment of wastewater, which is formed after olive oil production and is known to cause serious environmental hazards if it is discharged to receiving environments without treatment. This wastewater, which is called olive black water, contains high amounts of organic substances, oil-grease and phenolic substances. In this study, various pre-treatment and final treatment types were applied in the treatment of olive black water. In the pre-treatment system, acid digestion (AD, below pH 2) and precipitation with lime (LP, 12.5 pH ) processes were applied, and in the final treatment systems, the Fenton process and UVC ray contact after Fenton and ultrasound after Fenton were applied. As a result of the pre-treatment studies, it has been determined that the precipitation with lime is more successful than the crushing using acid. The removal efficiencies of COD, oil-grease, TOC and phenolic substances obtained at the end of pre-treatments by lime precipitation and acid cracking were 52%, 99.7%, 42%, 13% and 43%, 89%, 30%, 0.30% was determined, respectively. In LP+Fenton and AD+Fenton applications under the optimum conditions, COD, oil-grease and TOC removal efficiencies were determined as 75%, 99.3%, 62% and 66%, 99.4%, 42%, respectively. Accordingly, LP pre-treatment application before Fenton application gave more successful results than AD pre-treatment. COD removal efficiencies by LP+Fenton+UV and LP+Fenton+US applications are 78% and 90%, respectively. Likewise, the COD removal efficiencies by AD+Fenton+UV and AD+Fenton+US were determined as 54% and 77%, respectively. It can be seen that US application gives more successful results in terms of COD removal efficiencies. However, as a result of LP+Fenton+US and AD+Fenton+US applications, the COD, oil-grease and TOC removal efficiencies were determined as 90%, 98.5%, 67% and 77%, 98.4%, 64%, respectively. As a result of LP+Fenton+US application, where the best removal efficiency was obtained, it was determined that the COD concentration was 10.600 mg/L. Although the wastewater obtained as a result of the study has been degreased and made suitable for delivery to the anaerobic treatment plant, it is anticipated that the evaluation of the applied processes as a pre-treatment system may provide advantages for the final treatment plant.
dc.identifier.endpage77
dc.identifier.startpage1
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=CG8WvdvvxJP04Unr7Yecf4oJlZhSoZPl1uOowsa7xSeKrsR6XxEru5pDTuvBS8aK
dc.identifier.urihttps://hdl.handle.net/20.500.11776/11378
dc.identifier.yoktezid721065
dc.institutionauthorBalcı, Cemre Nur
dc.language.isotr
dc.publisherTekirdağ Namık Kemal Üniversitesi
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectFenton
dc.subjectUltrases
dc.subjectUVC
dc.subjectKireç ile çöktürme
dc.subjectAsit ile parçalama
dc.subjectFenton
dc.subjectUltrasound
dc.subjectUVC
dc.subjectLime precipitation
dc.subjectAcid digestion
dc.subjectÇevre Mühendisliği
dc.subjectEnvironmental Engineering
dc.titleZeytin karasuyunun ileri oksidasyon yöntemleriyle arıtımı
dc.title.alternativeTreatment of olive mill wastewater with advanced oxidation methods
dc.typeMaster Thesis

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
11378.pdf
Boyut:
1.9 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text