Tokat İli Merkez İlçesindeki Doğal Agrega Kaynaklarının Beton Agregası Olarak Kullanılabilirliğinin İncelenmesi
Yükleniyor...
Dosyalar
Tarih
2010
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Namık Kemal Üniversitesi, Ziraat Fakültesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmada Yeşilırmak nehrinden sağlanan ve Tokat Merkez ilçesindeki Tarımsal yapılarda yaygın olarak kullanılan agregaların büyük bir bölümünü karşılayan 3 adet ocaktan elde edilen agregaların beton yapımına uygunluğu araştırılmıştır. Çalışmada Türk Standartları Enstitüsü tarafından kabul edilen agrega deney yöntemleri kullanılmıştır. Agrega ocaklarından standartlara uygun olarak alınan agrega örnekleri üzerinde granülometri, birim ağırlık, özgül ağırlık ve su emme oranı, dona dayanıklılık, aşınmaya dayanıklılık, ince madde oranı ve organik madde miktarı, mineralojik analiz ile bu agregalarla üretilen betonun basınç dayanım deneyleri yapılmıştır. Elde edilen sonuçlardan incelenen agrega ocaklarına ilişkin agregaların granülometrik dağılımının uygun olmadığı, diğer özelliklerinin ise beton üretimi için uygun olduğu ve bu agregalarla üretilen betonun basınç dayanımının da yeterli olduğu görülmüştür. Çalışmada ayrıca agregaların uygun olmayan özelliklerinin iyileştirilmesinin nasıl yapılabileceği belirlenerek çözüm önerileri sunulmuştur.
In this study, aggregates of three quarries sampled from Tokat Province were tested to evaluate their suitability for concrete production. The aggregates were supplied from Yesilirmak River, and largely used in agricultural structures constructed in Tokat. Standard aggregate tests approved by Turkish Standards Institute were carried out to analyze the samples. Granulation, unit weight, specific weight, water absorption rate, resistance to frost, resistance against abrasion, ratio of fine materials, organic material contents and, mineralogical analysis of aggregates sampled from aggregate quarries were determined. Pressure resistance tests were conducted on concrete prepared by the aggregates. The results indicated that the aggregate granulation distribution of aggregate quarries evaluated was not suitable however other parameters determined were appropriate for concrete production. The resultant concrete had sufficient pressure resistance. The possible solutions to improve the improper characteristics of aggregates used in concrete were also determined and introduced with this study.
In this study, aggregates of three quarries sampled from Tokat Province were tested to evaluate their suitability for concrete production. The aggregates were supplied from Yesilirmak River, and largely used in agricultural structures constructed in Tokat. Standard aggregate tests approved by Turkish Standards Institute were carried out to analyze the samples. Granulation, unit weight, specific weight, water absorption rate, resistance to frost, resistance against abrasion, ratio of fine materials, organic material contents and, mineralogical analysis of aggregates sampled from aggregate quarries were determined. Pressure resistance tests were conducted on concrete prepared by the aggregates. The results indicated that the aggregate granulation distribution of aggregate quarries evaluated was not suitable however other parameters determined were appropriate for concrete production. The resultant concrete had sufficient pressure resistance. The possible solutions to improve the improper characteristics of aggregates used in concrete were also determined and introduced with this study.
Açıklama
Anahtar Kelimeler
Agrega, beton, Tokat, Aggregate, concrete
Kaynak
Tekirdağ Ziraat Fakültesi Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
7
Sayı
1