Reducing steaming times in the printing of nylon/elastane blend fabrics via chemical modification

Basit Öğe Kaydı
dc.authorscopusid14622205500
dc.authorscopusid57221629641
dc.authorscopusid57189376473
dc.contributor.authorAtav, Rıza
dc.contributor.authorYüksel, M.F.
dc.contributor.authorYakin, İ.
dc.date.accessioned2022-05-11T14:28:18Z
dc.date.available2022-05-11T14:28:18Z
dc.date.issued2021
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Tekstil Mühendisliği Bölümü
dc.description.abstractNylon fibres are commonly used in blends with elastane. One of the problems encountered in the printing of nylon/elastane blend fabrics is the necessity of long steaming times for fixation, which causes an increase in energy consumption. In this study, the possibility of printing polyamide fabrics with 1:2 metal complex dyes for short steaming times was investigated. For this aim, laboratory and sample scale trials were performed to develop a method of chemically modifying fibres so that polyamide fabrics can be printed in short steaming times. Based on the results obtained in both trials, it was noticed that the steaming time for fixation could be reduced from 30 minutes to 15 minutes by printing with 1:2 metal complex dyes without causing a loss of printing yield and without affecting the fastness adversly in case of applying cationisation pretreatment with a modified quaternary polyalkylamine compound based product. © 2021, Institute of Biopolymers and Chemical Fibres. All rights reserved.
dc.description.sponsorship3130834
dc.description.sponsorshipWe would like to thank to TUBITAK for supporting this study within the 3130834 coded TEYDEB project. In addition, we are grateful to the Serhas Tekstil Company for giving us the opportunity to realise sample scale industrial printing trials.
dc.identifier.doi10.5604/01.3001.0014.5050
dc.identifier.endpage85
dc.identifier.issn1230-3666
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85099659342
dc.identifier.scopusqualityQ3
dc.identifier.startpage81
dc.identifier.urihttps://doi.org/10.5604/01.3001.0014.5050
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6757
dc.identifier.volume29
dc.indekslendigikaynakScopus
dc.institutionauthorAtav, Rıza
dc.institutionauthorYüksel, M.F.
dc.language.isoen
dc.publisherLukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres
dc.relation.ispartofFibres and Textiles in Eastern Europe
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectCationisation pretreatment
dc.subjectColour
dc.subjectFastness
dc.subjectNylon/elastane blend fabric
dc.subjectPrinting
dc.subjectChemical modification
dc.subjectEnergy utilization
dc.subjectMetal complexes
dc.subjectPolyamides
dc.subjectRayon
dc.subjectBlend fabrics
dc.subjectCationisation
dc.subjectElastane
dc.subjectMetal-complex dye
dc.subjectNylon fibre
dc.subjectPre-Treatment
dc.subjectSteaming time
dc.subjectBlending
dc.titleReducing steaming times in the printing of nylon/elastane blend fabrics via chemical modification
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
6757.pdf
Boyut:
690.2 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu