Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique

Basit Öğe Kaydı
dc.authorid0000-0003-3239-4641
dc.authorscopusid57188561396
dc.authorscopusid57191668189
dc.authorscopusid26636029300
dc.authorwosidYILMAZ, Serdar/ABA-6322-2020
dc.authorwosidDemir, Fatih/A-6676-2018
dc.contributor.authorYılmaz, Serdar Osman
dc.contributor.authorDemir, Fatih
dc.contributor.authorTeker, Tanju
dc.date.accessioned2022-05-11T14:26:47Z
dc.date.available2022-05-11T14:26:47Z
dc.date.issued2018
dc.departmentFakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.description.abstractThe study presents the behavior of FeCrC particulates reinforced and Ni-based composites produced by a mechanical alloying process in the presence of friction and wear. Ni, Al and M7C3 powders having 100 mu m size were mixed, mechanically alloyed and the compacts were sintered in an atmosphere controlled furnace. The mechanically alloyed (MAed) samples were investigated by SEM, EDS and DTA. For the wear tests, the samples were tested in dry conditions. The worn surfaces were examined using OM to study the wear behavior. The friction coefficient was recorded continuously during the wear test and wear rate. The highest wear rate was obtained at 800 degrees C, and the lowest was obtained at 900 degrees C. With the increase of reinforcement amount, wear rate decreased.
dc.description.sponsorshipNamik Kemal UniversityNamik Kemal University [NKUBAP.00.17.KR.14.01]
dc.description.sponsorshipThis work was carried out with the financial support of Namik Kemal University under project number of NKUBAP.00.17.KR.14.01.
dc.identifier.doi10.4149/km_2018_1_65
dc.identifier.endpage74
dc.identifier.issn0023-432X
dc.identifier.issn1338-4252
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85123774582
dc.identifier.scopusqualityQ3
dc.identifier.startpage65
dc.identifier.urihttps://doi.org/10.4149/km_2018_1_65
dc.identifier.urihttps://hdl.handle.net/20.500.11776/6598
dc.identifier.volume56
dc.identifier.wosWOS:000431475200006
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorYılmaz, Serdar Osman
dc.language.isoen
dc.publisherRedakcia Kovove Materialy
dc.relation.ispartofKovove Materialy-Metallic Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectmetal matrix composites
dc.subjectmechanical alloying
dc.subjectabrasion
dc.subjectthermal analysis
dc.subjectCarbon-Steel
dc.subjectFabrication
dc.subjectCoatings
dc.titleSliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
6598.pdf
Boyut:
1.5 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
Çorlu Mühendislik Fakültesi Koleksiyonu