Adsorption of Diclofenac Sodium and Tetracycline From Aqueous Solution Using PVA Films Prepared with Modal/Cotton Fiber Wastes
Küçük Resim Yok
Tarih
2024
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
John Wiley and Sons Inc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, fiber-polymer composite films were prepared by adding 0.5 g, 1.0 g, and 1.5 g of modal/cotton (50 : 50) waste to 10 % PVA film, and the properties of the films were revealed by SEM, FTIR analyzes and swelling percentage. It is observed that the strength of the bonds in the FTIR analysis decreases when modal/cotton fibers are added to the PVA film. While a 406 % swelling is achieved in the PVA film, the swelling percentages of the films decrease when modal/cotton fibers are added to the PVA film, and a greater swelling is observed at pH 9 compared to pH 5. The adsorption efficiency of tetracycline and diclofenac sodium on the films was researched at different pH levels and film doses. Tetracycline removal reached its highest value at pH 9, while diclofenac sodium removal reached its highest value at pH 5. Langmuir and Freundlich isotherm models were determined for tetracycline and diclofenac sodium adsorption. Tetracycline removal is better described by the Freundlich isotherm model, whereas diclofenac sodium removal fits the Langmuir isotherm model better. As a result, films prepared with modal/cotton waste not only provide tetracycline and diclofenac sodium removal but also contribute to waste recycling by utilizing waste fiber materials. © 2024 Wiley-VCH GmbH.
Açıklama
Anahtar Kelimeler
Adsorption, diclofenac sodium, PVA film, tetracycline
Kaynak
ChemistrySelect
WoS Q Değeri
Scopus Q Değeri
Cilt
9
Sayı
18