Orta Karadeniz Geçit İklim Kuşağında İkinci Ürün Silajlık Mısır Tarımında Farklı Toprak İşleme ve Ekim Yöntemlerinin Toprak Özellikleri ve Verim Üzerine Etkileri
Yükleniyor...
Dosyalar
Tarih
2007
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Namık Kemal Üniversitesi, Ziraat Fakültesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmada, Orta Karadeniz Geçit İklim Kuşağında bulunan Tokat yöresinde ikinci ürün silajlık mısır tarımında geleneksel toprak işleme yöntemi (kulaklı pulluk + kültüvatör + dişli tırmık) ve azaltılmış toprak işleme yöntemi (çizel + dişli tırmık) ile düze ve sırta ekim yöntemlerinin toprağın fiziksel özelliklerine, (toprak nem içeriği, hacim ağırlığı ve penetrasyon direnci), bitki çıkış (ortalama çimlenme süresi (OÇS), çimlenme oranı indeksi (ÇOİ) ve tarla filiz çıkış derecesi (TFÇD)) ve bitki gelişme parametreleri (bitki boyu, bitki sap çapı, yeşil ot ve kuru madde verimi) üzerine etkileri incelenmiştir. Nem içeriği, hacim ağırlığı ve penetrasyon değerleri, 0-10 cm derinlikte, % 24,39-% 25,42; 1,24-1,33 g/cm3 ve 0,58–1,18 MPa arasında değişirken, 10-20 cm derinlikte ise, % 25,65- % 25,95; 1,25–1,34 g/cm3 ; 0,95 – 1,60 MPa arasında değişmiştir. Bitkisel özellikler açısından, OÇS, ÇOİ ve TFÇD değerleri sırasıyla, 12,80-12,85 gün, 0,34–0,35 adet/m.gün ve % 86,11-88,61 arasında bulunmuştur. Bitki boyu, gövde çapı, yeşil ot ve kuru madde verimleri de sırasıyla 244,7-266,2 cm; 2,9-3,1 cm; 7525,9–7580,8 kg/da ve 1523,4–1534,4 kg/da arasında değişmektedir. Sonuç olarak, toprak nem, hacim ağırlığı ve penetrasyon değerleri, geleneksel yönteme göre, azaltılmış toprak işleme yönteminde daha yüksek, fakat sırta ekim yönteminde düze ekime göre daha düşük düzeyde bulunmuştur. Bitkisel özellikler açısından ÇOİ ve TFÇD değerleri, geleneksel toprak işleme ve düze ekim yöntemine göre azaltılmış toprak işleme ve sırta ekim yönteminde daha yüksek çıkmıştır. Bitki boyu, gövde çapı, yeşil ot ile kuru madde verimi değerleri açısından da, geleneksel toprak işleme ve düze ekim yöntemine göre azaltılmış toprak işleme ve sırta ekim yöntemi daha yüksek değerler vermiştir. Bu çalışmanın bir sonucu olarak azaltılmış toprak işleme ve sırta ekim yöntemleri ikinci ürün silajlık mısır üretiminde önerilebilir.
In this study, the effects of conventional (mouldboard plough+ cultivator + spike tooth harrow) and conservational (reduced) tillage system (chisel + spike tooth harrow) and flat and ridge planting systems on soil physical properties (soil moisture content, bulk density and penetration resistance) and plant characteristics of second crop silage maize grown in Tokat province situated in Mid-Blacksea Transition Climate Belt were investigated. Plant emergence and harvesting properties investigated were mean emergence dates, emerged rate index, percentage of emerged seedling, plant height, stem diameter, silage yield and dry matter yield. Soil moisture content, bulk density and penetration resistance varied from 24.39 to 25.42 %, and from 1.24 to 1.33 g/cm3 , and from 0.58 to 1.60 MPa, at 0-10 cm soil depth respectively; the same properties varied from 24.65 to 25.95 %, and from 1.25 to 1.34 g/cm3 , and from 0.95 to 1.60 MPa, at 10-20 cm soil depth respectively. For plant properties; mean emerged dates, emerged rate index, and percentage of emerged varied from 12.80 to 12.85 days, and from 0.335 to 0.346 seedling/m day, and from 86.11 to 88.61, respectively. Plant height, stem diameter, silage yield and dry matter yield varied from 244.7 to 266.2 cm, from 2.88 to 3.13 cm, from 7525.89 to 7580.80 kg/da, and from 1523.36 to 1534.35 kg/da, respectively. The results indicated that soil moisture content, bulk density and penetration resistance in conservational tillage system were higher than the conventional tillage system. Ridge planting system yielded higher values than that of the flat planting system. The emerged rate index, and percentage of emerged seedling in conservational tillage and flat planting systems were lower than conventional tillage and ridge planting system. The mean plant height, stem diameter, silage yield and dry matter yield were higher in conservational tillage and ridge planting systems than the conventional tillage and flat planting systems. The results of this study indicated conservational tillage system and ridge planting system could be advised for the second crop sillage maize production.
In this study, the effects of conventional (mouldboard plough+ cultivator + spike tooth harrow) and conservational (reduced) tillage system (chisel + spike tooth harrow) and flat and ridge planting systems on soil physical properties (soil moisture content, bulk density and penetration resistance) and plant characteristics of second crop silage maize grown in Tokat province situated in Mid-Blacksea Transition Climate Belt were investigated. Plant emergence and harvesting properties investigated were mean emergence dates, emerged rate index, percentage of emerged seedling, plant height, stem diameter, silage yield and dry matter yield. Soil moisture content, bulk density and penetration resistance varied from 24.39 to 25.42 %, and from 1.24 to 1.33 g/cm3 , and from 0.58 to 1.60 MPa, at 0-10 cm soil depth respectively; the same properties varied from 24.65 to 25.95 %, and from 1.25 to 1.34 g/cm3 , and from 0.95 to 1.60 MPa, at 10-20 cm soil depth respectively. For plant properties; mean emerged dates, emerged rate index, and percentage of emerged varied from 12.80 to 12.85 days, and from 0.335 to 0.346 seedling/m day, and from 86.11 to 88.61, respectively. Plant height, stem diameter, silage yield and dry matter yield varied from 244.7 to 266.2 cm, from 2.88 to 3.13 cm, from 7525.89 to 7580.80 kg/da, and from 1523.36 to 1534.35 kg/da, respectively. The results indicated that soil moisture content, bulk density and penetration resistance in conservational tillage system were higher than the conventional tillage system. Ridge planting system yielded higher values than that of the flat planting system. The emerged rate index, and percentage of emerged seedling in conservational tillage and flat planting systems were lower than conventional tillage and ridge planting system. The mean plant height, stem diameter, silage yield and dry matter yield were higher in conservational tillage and ridge planting systems than the conventional tillage and flat planting systems. The results of this study indicated conservational tillage system and ridge planting system could be advised for the second crop sillage maize production.
Açıklama
Anahtar Kelimeler
Geleneksel ve azaltılmış toprak işleme yöntemi, sırta ve düze ekim yöntemi, toprak özellikleri, silajlık mısır verimi, Conventional and conservational (reduced) tillage systems, ridge tillage and flat planting, soil properties, silage maize yield
Kaynak
Tekirdağ Ziraat Fakültesi Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
4
Sayı
3