Çelik liflerin geometrik şeklinin ve oranının beton özelliklerine etkisinin araştırılması
Yükleniyor...
Dosyalar
Tarih
2021
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Birçok araştırmada betonun teknik özelliklerini artırmak için farklı cins ve tiplerdeki liflerle çalışmalar yapılmıştır. Genellikle sonyıllarda betonun mekanik özeliklerinin öncelikli olan yerlerde çelik lif tercih edilmektedir. Bu çalışmada, tarafımızca şekil verilerekoluşturulan 2 farklı çelik lif tipi (Z, C şeklinde) ve 80/60 çelik lifi, çimento ağılığının 0.0, 0.10, 0.15 ve 0.20 oranlarındakullanılmıştır. Bu farklı şekillere sahip çelik liflerin, taze betonda oluşturdukları hava %’si miktarı ve işlenebilme özelliğigözlenirken; sertleşmiş betonda ise basınç, eğilme ve aşınma dayanımlarına olan etkileri incelenmiştir. Lifin şekli ve oranının, tazeve sertleşmiş beton özellikleri üzerinde etkili olduğu görülmüştür. Taze ve sertleşmiş betonda en optimum özellik, 80/60 lifinin%10 kullanılmasıyla elde edilmiştir.
Many studies have been conducted with fibers of different types and shapes to increase the technical properties of concrete. Generally, steel fiber has been preferred in the places where the mechanical properties of concrete have priority in recent years. In this study, 2 different steel fiber types (Z, C shaped) and 80/60 steel fiber, which are formed by us, were used in the ratios of cement weights at 0.0, 0.10, 0.15 and 0.20. While the amount of air content and the workability of the steel fibers of these different shapes added in fresh concrete were observed; In hardened concrete, its effects on compressive strength, flexural strength and abrasion resistance were investigated. The shape and ratio of the fiber have been shown to be effective on fresh and hardened concrete properties. The optimum feature in fresh and hardened concrete has been achieved by using 10% of 80/60 fiber.
Many studies have been conducted with fibers of different types and shapes to increase the technical properties of concrete. Generally, steel fiber has been preferred in the places where the mechanical properties of concrete have priority in recent years. In this study, 2 different steel fiber types (Z, C shaped) and 80/60 steel fiber, which are formed by us, were used in the ratios of cement weights at 0.0, 0.10, 0.15 and 0.20. While the amount of air content and the workability of the steel fibers of these different shapes added in fresh concrete were observed; In hardened concrete, its effects on compressive strength, flexural strength and abrasion resistance were investigated. The shape and ratio of the fiber have been shown to be effective on fresh and hardened concrete properties. The optimum feature in fresh and hardened concrete has been achieved by using 10% of 80/60 fiber.
Açıklama
Anahtar Kelimeler
Kaynak
Politeknik Dergisi
WoS Q Değeri
N/A
Scopus Q Değeri
Cilt
24
Sayı
2