dc.contributor.author | Çınar, Kenan | |
dc.contributor.author | Güven, İbrahim | |
dc.contributor.author | Öz, Fatih E. | |
dc.contributor.author | Ersoy, N. | |
dc.date.accessioned | 2022-05-11T14:26:47Z | |
dc.date.available | 2022-05-11T14:26:47Z | |
dc.date.issued | 2018 | |
dc.identifier.isbn | 9781510872073 | |
dc.identifier.uri | https://hdl.handle.net/20.500.11776/6597 | |
dc.description | 33rd Technical Conference of the American Society for Composites 2018 -- 24 September 2018 through 27 September 2018 -- -- 142871 | en_US |
dc.description.abstract | Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave manufacturing method. Tests were conducted on a custom low velocity impact test set-up. In order to investigate and quantify the internal damage of the samples, x-ray micro-computed tomography technique was used. The results showed that the deflection of cross-ply samples was higher than the unidirectional ones, and as the thickness decreases deflection increases for the same loading conditions. In addition, as the corner radius decreased, the deflection was more pronounced. Delamination migration was observed at the mid-plane of the corner in unidirectional samples while delamination planes largely remained separate and parallel to each other in the cross-ply samples. © Copyright© (2018) by DEStech Publications, Inc. All rights reserved. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | DEStech Publications Inc. | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Computerized tomography | en_US |
dc.subject | X rays | en_US |
dc.subject | Composite laminate | en_US |
dc.subject | Loading condition | en_US |
dc.subject | Low velocity impact | en_US |
dc.subject | Low velocity impact test | en_US |
dc.subject | Manufacturing methods | en_US |
dc.subject | Variable thickness | en_US |
dc.subject | X ray micro-computed tomography | en_US |
dc.subject | X-ray computed tomography | en_US |
dc.subject | Laminated composites | en_US |
dc.title | Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography | en_US |
dc.type | conferencePaper | en_US |
dc.relation.ispartof | 33rd Technical Conference of the American Society for Composites 2018 | en_US |
dc.department | Fakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü | en_US |
dc.identifier.volume | 1 | en_US |
dc.identifier.startpage | 561 | en_US |
dc.identifier.endpage | 576 | en_US |
dc.institutionauthor | Çınar, Kenan | |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.authorscopusid | 57214703253 | |
dc.authorscopusid | 6601970288 | |
dc.authorscopusid | 56258316400 | |
dc.authorscopusid | 6602432376 | |
dc.identifier.scopus | 2-s2.0-85059310886 | en_US |