Investigation of physical and mechanical properties of mortars produced by polymer coated perlite aggregate
Özet
With its low unit weight, expanded perlite (EP) offers significant advantages in heat and sound insulation in the construction sector. However, due to its high-water absorption capacity, EP affects the physical and mechanical properties of concrete negatively. Therefore, it is aimed to reduce water absorption by coating the EP with polymer and thus to improve its mechanical and physical properties. In this study, mortar production was carried out by replacing coated and uncoated EP with CEN reference sand at 0%, 20%, 40%, 60%, and 80% respectively. The effective water/cement ratio of all produced mortar samples was determined to be 0.6. For coated and uncoated EP aggregate mortar series, unit weight, compressive strength, bending tensile strength, water absorption, ultrasonic pulse velocity (UPV), and thermal conductivity coefficient were determined. The results showed that the unit weight of the mortar samples decreased as the amount of EP increased, but their physical and mechanical properties also changed. Mortar samples with better thermal insulation properties were obtained with decreasing thermal conductivity values. The polymer coating of EP improved physical and mechanical properties. Especially in the 80% substituted EP series, the thermal conductivity decreased from 1.20 to a coefficient of 0.91 W/mK. © 2021
Cilt
38Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Kevlar/karbon elyaf takviyeli lamina kompozitlerde termal şekil değiştirme davranışının incelenmesi
Taşkın, Ersin (Namık Kemal Üniversitesi, 2015)Çalışmamızda dokuma karbon, Ncf karbon, dokuma kevlar tekstil esaslı epoksi kompozitlerin termal yükler altında burkulma davranışı deneysel ve nümerik olarak ortaya konulmuştur. Ortotropik doğrultularda alınan numunelerde ... -
The effect of material properties and isolation system on thermal bridge behavior
Gaygusuzoğlu, Güler; Bakis, Adem (Pamukkale Univ, 2017)Reducing the energy consumption is very important for the development of the countries. For this reason, energy consumption at the buildings is very important. It is necessary to know behaviours of thermal bridges, affects ... -
Experimental and numerical investigation of heat transfer in a channel with multiple phase change materials (PCMs)
Akyol, Erhan; Hacıhafızoğlu, Oktay; Susantez, Çiğdem; Kahveci, Kamil; Akyol, Uğur (Elsevier Ltd, 2022)In this study, the thermal performance of an air-phase change material (PCM) unit used in free cooling applications was examined experimentally and numerically by Comsol finite element simulation software. Effects of the ...