dc.contributor.author | Öztürk, Tuba | |
dc.contributor.author | Özcan, Ömer Faruk | |
dc.date.accessioned | 2022-05-11T14:17:30Z | |
dc.date.available | 2022-05-11T14:17:30Z | |
dc.date.issued | 2021 | |
dc.identifier.issn | 0149-6395 | |
dc.identifier.issn | 1520-5754 | |
dc.identifier.uri | https://doi.org/10.1080/01496395.2020.1805465 | |
dc.identifier.uri | https://hdl.handle.net/20.500.11776/6383 | |
dc.description.abstract | Electrocoagulation and chemical coagulation are treatment methods based on the same removal mechanism.In this study, it was investigated the effectiveness of coagulation methods using Al electrodes and Al-2(SO4)(3).18H(2)O on the wastewaters from cardboard production.In the electrocoagulation experiments, the optimum current and pH where the highest COD removal efficiency by 54% was achieved were determined respectively as 10A and 6.62.The study also it was seen that 58%COD removal was reached for the KCl concentration of 0.5 mg/L that was applied.In the chemical coagulation study, the highest removal efficiencies were obtained as 36%, 95% and 97% for respectively COD, color and turbidity.The results show that higher efficiency could be achieved by electrocoagulation as a pre-treatment step. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Taylor & Francis Inc | en_US |
dc.identifier.doi | 10.1080/01496395.2020.1805465 | |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Paper | en_US |
dc.subject | wastewater | en_US |
dc.subject | efficiency | en_US |
dc.subject | aluminum | en_US |
dc.subject | electrodes | en_US |
dc.subject | Waste-Water Treatment | en_US |
dc.subject | Supporting Electrolytes | en_US |
dc.subject | Mill Effluent | en_US |
dc.subject | Pulp | en_US |
dc.subject | Removal | en_US |
dc.subject | Optimization | en_US |
dc.subject | Decolorization | en_US |
dc.subject | Prediction | en_US |
dc.subject | Reactor | en_US |
dc.subject | Ph | en_US |
dc.title | Effectiveness of electrocoagulation and chemical coagulation methods on paper industry wastewaters and optimum operating parameters | en_US |
dc.type | article | en_US |
dc.relation.ispartof | Separation Science and Technology | en_US |
dc.department | Fakülteler, Çorlu Mühendislik Fakültesi, Çevre Mühendisliği Bölümü | en_US |
dc.identifier.volume | 56 | en_US |
dc.identifier.issue | 12 | en_US |
dc.identifier.startpage | 2074 | en_US |
dc.identifier.endpage | 2086 | en_US |
dc.institutionauthor | Öztürk, Tuba | |
dc.institutionauthor | Özcan, Ömer Faruk | |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.authorwosid | Öztürk, Tuba/ABA-9110-2020 | |
dc.identifier.wos | WOS:000557972000001 | en_US |