Ara
Toplam kayıt 24, listelenen: 1-10
A mathematical model for through-air drying process of yarn bobbins
(Taylor and Francis Ltd., 2021)
In this study, a mathematical model has been developed to simulate the through-air drying process of yarn bobbins. For this purpose, experimental data was obtained in a prototype experimental set up by passing pressurized ...
Analysis of polyacrylonitrile nanofiber yarn formation in electrospinning by using a conical collector and two oppositely charged nozzles
(Taylor and Francis Ltd., 2021)
Nanofiber production by electrospinning has become a common production method as it is an easy and flexible system producing nanofibrous webs. However, direct spinning of nanofibers into a yarn would lead to conversion of ...
The Effect of Dyeing and Mohair/Wool Blend Ratio on Fabric Physical Properties
(Taylor & Francis Inc, 2020)
In this study, dyeing effects on the physical properties of blended fabrics containing different ratios of wool and mohair fibers were investigated in detail. Six types of fabrics were produced by using 100% wool yarns and ...
Investigation of the Effect of Weft Yarn Parameters on the Elasticity and Recovery Properties of Stretch Denim Fabrics
(Bellwether Publishing, Ltd., 2021)
The aim of this study was to examine the effect of weft yarn parameters on the elasticity and recovery properties of stretch denim fabrics. For this purpose, frequently used denim fabric was taken as a reference point, and ...
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
Effect of the ozonation process on the dyeability of mohair fibres
(Wiley-Blackwell, 2011)
This work has focused on the use of ozonation in order to improve the dyeability of mohair fibres. The study was carried out using a known concentration of ozone and involved process parameters such as wet pick-up, level ...
Low Temperature Dyeing of Plasma Treated Luxury Fibres. Part I: Results for Mohair (Angora Goat)
(Inst Chemical Fibres, 2011)
This study focused on the usage of plasma treatment for the modification of fibre surfaces to achieve the dyeing of mohair fibres at lower temperatures without causing a decrease in dye-exhaustion. The study was carried ...
Solvent Assisted Low Temperature Dyeing. Part I: Results for Mohair (Angora Goat) Fibres
(Inst Chemical Fibres, 2011)
It is generally known that mohair tends to lose its luster when dyed for prolonged periods at the boil, and to preserve its luster it is generally necessary to use short dyeing cycles and low dyeing temperatures. Beyond ...
The Use of New Technologies in Dyeing of Proteinous Fibers
(Intech Europe, 2013)
[No Abstract Available]
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)
In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ...