Başlık için Çorlu Mühendislik Fakültesi Koleksiyonu listeleme
Toplam kayıt 990, listelenen: 268-287
-
Ecological analysis of heavy metal and radioactivity potential of Holocene sediments in Iznik Lake
(Inst Nuclear Chemistry Technology, 2019)In this study, the heavy metal and radioactive properties of Iznik Lake were investigated. Concentration values of the first (Ag, Bi, Mo, Sn, Se, Zn, As, B, Cd, Co, Cr, Cu, Ni, Pb, Pt and Sb) and second (Na, Mg, K, Ca, P, ... -
Ecotoxicological and inorganic chemicals' characterization of rainwater in an urban residential area
(Desalination Publ, 2015)A survey of inorganic chemicals and acute ecotoxicity to Daphnia magna was performed in rain water samples collected in an urban area. Samples were collected from three types of origins namely ground surface contact, ... -
Effect of Addition of Multiwalled Carbon Nanotubes on the Piezoelectric Properties of Polypropylene Filaments
(Amer Scientific Publishers, 2015)The effect of addition of multiwalled carbon nanotubes (CNTs) on the piezoelectric properties of polypropylene (PP) monofilaments has been investigated. Various amounts of CNTs (0%, 0.01%, 0.1% and 1% weight ratios) were ... -
The Effect of Air Pollution on Respiratory System Disease Admissions and Health Expenditures
(2019)Objectives: Air pollution increases hospital admissions due to respiratory system diseases. This study aims to investi-gate health expenditures due to hospital admissions in Erzincan, Turkey.Methods: We acquired data on ... -
The effect of an emergent vegetation (i.e. Phragmistes Australis) on wave attenuation and wave kinematics
(Coastal Education & Research Foundation, 2013)Coastal vegetation acts as a natural barrier at many coastal zones, protecting the landside against wave effects and coastal erosion. It is known that coastal vegetation affects wave properties, and studies regarding this ... -
Effect of bimetallic (Ni and Co) substitution on magnetic properties of MnFe2O4 nanoparticles
(Elsevier Ltd, 2016)Nickel and cobalt substituted manganese ferrite nanoparticles (NPs) with the chemical composition NixCoxMn1–2xFe2O4 (0.0?x?0.5) NPs were synthesized by one-pot microwave combustion route. The effect of co-substitution (Ni, ... -
Effect of boundary condition on the cyclic response of I-shaped steel columns: Two-story subassemblage versus isolated column tests
(Wiley, 2022)Recent studies on isolated steel columns under combined axial load and cyclic lateral drift showed that the column response is affected by the boundary condition. To consider more realistic boundary conditions of first-story ... -
Effect of bromide and other factors on brominated trihalomethanes formation in treated water supply in Jordan
(Desalination Publ, 2016)Chlorine disinfection of drinking water containing natural organic matter leads to the formation of brominated trihalomethanes (THMs) in the presence of bromide ions. In the present study, the results of an experimental ... -
EFFECT OF CALCINATION CONDITIONS ON PARACETAMOL PHOTODEGRADATION BY METAL (Zn, Ag, Fe) DOPED TiO2 CATALYSTS
(Parlar Scientific Publications (P S P), 2017)The aim of this study was to evaluate paracetamol photodegradation by metal (Zn, Ag, Fe) doped TiO2 process and also examine the effects of metal/TiO2 ratio and catalyst preparation parameters on paracetamol degradation. ... -
Effect of carbides on the wear resistance of white cast iron alloyed with 12.7 wt.-% Cr and nickel
(Carl Hanser Verlag, 2020)White cast iron with about 12.7 wt.-% chromium was alloyed with Ni, W and Mo for heat treatment applications. Heat treatments were performed at a range of 850-1050 degrees C for 1 h in order to distribute M7C3 carbides ... -
The effect of collector parameters on nanofiber yarns produced by electro yarn spinning machine with conical collector
(Taylor and Francis Ltd., 2021)In this work, electrospun yarns were produced by a nanofiber yarn spinning machine with a conical collector. In the first part, two different polymers (PAN and PVDF-HFP) were used in nanofiber yarn spinning with two different ... -
The effect of core-sheath proportion on the characteristics of fabrics produced with hollow yarns: part II comfort and mechanical properties
(Taylor & Francis Ltd, 2018)The study aims to investigate the effect of hollow yarn structure and the sheath-core proportion of hollow yarns on the permeability properties of the knitted fabrics. In order to accomplish this, core yarns in the yarn ... -
The effect of core-sheath proportion on the characteristics of hollow yarns: part I mechanical properties
(Taylor and Francis Ltd., 2018)In the scope of this study, core yarns in the yarn count of 59 tex were produced by using cotton, viscose, wool, and polyester fibers in the sheath and different ratios of polyvinyl alcohol (PVA) in the core. After completion ... -
The Effect of Cr3+ Substitution on Magnetic Properties of CoFe2O4 Nanoparticles Synthesized by Microwave Combustion Route
(Springer, 2016)CoCr (x) Fe2-x O-4 (0.0 aecurrency sign x aecurrency sign 1.0) nanoparticles were synthesized by a microwave combustion method and the effect of Cr3+ substitution on structural, morphological, and magnetic properties of ... -
The Effect of Different Connections in Double Layered Woven Fabrics on Comfort Properties
(Korean Fiber Soc, 2012)With the increasing demand of fabrics for special usage areas, more complex woven structures are designed and from the structural point of view, especially the parameters which affect the comfort properties become more ... -
Effect of different rotational speeds on mechanical and metallurgical properties of friction welded dissimilar steels
(Carl Hanser Verlag, 2018)In this study, effect of rotational speed on the characteristic microstructure and mechanic properties of the AISI 1030/AISI 420 stainless steel couple welded by friction welding method was experimentally investigated. The ... -
The Effect of Dyeing and Mohair/Wool Blend Ratio on Fabric Physical Properties
(Taylor & Francis Inc, 2020)In this study, dyeing effects on the physical properties of blended fabrics containing different ratios of wool and mohair fibers were investigated in detail. Six types of fabrics were produced by using 100% wool yarns and ... -
Effect of electric field on contact angle and droplet shape in XLPE dielectric materials
(Gazi Univ, Fac Engineering Architecture, 2021)XLPE dielectric materials have an important place in electricity transmission and distribution. The aging of XLPE dielectric materials during the service period is inevitable. The surface properties of XLPE dielectric ... -
Effect of FeTi-FeB inoculation on the shape of carbide reinforcements in hypoeutectic high chromium white cast iron
(Walter De Gruyter Gmbh, 2022)FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5-2.5 wt% at 50 degrees C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as ...
