Ara
Toplam kayıt 10, listelenen: 1-10
Investigation of the effect of drying air temperature on drying time by numerical method for textile bobbins
(Institute of Physics Publishing, 2019)
Drying of the yarn bobbins in the textile sector is a very important stage among the textile finishing processes. Because this process takes a lot of time and causes a large amount of energy consumption. In this study, ...
Bending and compression performance of composite tube reinforced foam core sandwich structures
(Applied Mechanics Laboratory, 2020)
In some applications such as walls and roofs, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography
(DEStech Publications Inc., 2018)
Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave ...
Design of a real-sized composite drive shaft and critical points from beginning to end
(Applied Mechanics Laboratory, 2020)
In this study, the replacement of a metal drive shaft by a composite counterapart was investigated. The drive shaft considered here is a thin walled tube with an internal diameter of 60 mm and a length of 1200 mm. These ...
Research on the fire endurance of the silica sand membrane
(Institute of Physics Publishing, 2019)
In this study, the fire endurance, density, low-temperature deflection, penetration and ring-ball method tests of the membrane produced throughout the mixing of Bitumen, IPP (isotactic polypropylene), LDPE (Low-density ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)
The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ...
A review of new technologies in valve systems of internal combustion engines and their effects
(Institute of Physics Publishing, 2019)
Efficient use of energy is becoming increasingly crucial due to global warming and depleting fossil fuel sources. Automotive manufacturers aim for fuel economy, reduction of exhaust emissions, durability, volume and weight ...
Design of air cooling unit with PCM
(Institute of Physics Publishing, 2019)
In this paper a heat absorption unit has been designed to cool the entering hot air. For this aim, five slabs of PCM (Phase change material) have been used inside the cooling unit. The velocity and temperature values of ...