Meslek Yüksekokulları
Collections in this community
Recent Submissions
-
Güncel Sanatta Tekstil Heykellerin Temsil Niteliği
(2020)1960’lı yıllarla birlikte değişen sosyo-ekonomik ve kültürel ortam, sanata ilişkin tüm kavram veuygulamaları yeni temsil arayışları çerçevesinde değiştirmiştir. Genel olarak, geleneksel sanatlar vezanaat başlığı altında ... -
Mechanical Strenght of Historical Oakwood on Traditional Tekirdag Houses and the Effect of Treatment Procedure on Mechanical Strenght
(Gazi Univ, 2011)The process of treatment with chemicals provides very successful results if applied on new wooden material. When applied on old material it has negative effects on the mechanic strength of wood as much as positive effects. ... -
Investigation of the effect of MHD slip flow on heat transfer between parallel plates with second-order slip boundary conditions
(Begell House Inc., 2021)In this study, the effect of the second-order slip boundary condition flow model on the flow and heat transfer characteristics in the presence of a magnetic field acting normal to the plate surface in the magnetohydrodynamic ... -
Proportional impact prediction model of animal waste fat-derived biodiesel by ANN and RSM technique for diesel engine
(Elsevier Ltd, 2022)Instead of many experimental studies made for the suitability of biodiesel for use in diesel engine, it has become easier to determine by fewer experiments with the development of computer applications. In this research, ... -
A traditional anatolian wood carving technique: Kundekari
(2010)Kündekari is a traditional Turkish wood carving technique that hundreds or thousands of wooden parts are carved one by one without using glue, nail or peg by hands and link each other by fitted into techniques. Although ... -
Energy balance of silage maize irrigated by drip irrigation in thrace region of turkey
(Scibulcom Ltd., 2020)Silage maize production was evaluated for energy cost, energy efficiency and net energy in this study. The silage maize was irrigated with drip irrigation. Mechanisation, amount and type of inputs and output were determined ... -
Quality Changes in Apple in Evaporative Cooling Store
(Springer, 2020)The temperature and moisture content throughout the storage time changes according to the type and variety of fruit. So the ambient temperature and relative humidity in the store must be same anywhere. Different temperatures ... -
Vibration of axially functionally graded nano rods and beams with a variable nonlocal parameter
(Techno-Press, 2018)Vibration of axially functionally graded nano-rods and beams is investigated. It is assumed that the material properties change along the rod and beam length. The Ritz method with algebraic polynomials is used in the ... -
Energy balance of sunflower production
(Eesti Pollumajandusulikool, 2017)The aim of the present study was to make an energy analysis of sunflower crop in the Trakya Region of Turkey, to evaluate the potential for using it as bioenergy source. Actual data for the common cropping practices applied ... -
Vibration analysis of symmetric laminated composite plates with attached mass
(Taylor & Francis Inc, 2016)In this study, vibration of symmetrically laminated composite plates with attached mass is studied. The Ritz method with algebraic polynomial displacement field is used. The plates with at least two adjacent free edges are ... -
Modelling of Ambient Factors and Quality Changes for Peach Cold Storage
(Scibulcom Ltd, 2016)Spatial variation of temperature and relative humidity were estimated with Computational Fluid Dynamics (CFD) at top, middle and base levels for peach storage and verified with measured data in an experimental cold store ... -
Wave propagation analysis of embedded (coupled) functionally graded nanotubes conveying fluid
(Elsevier Ltd, 2015)In this study, wave propagation in embedded nanotubes conveying fluid is studied. Tubes are formulated as a functionally graded beam in which material properties are changing in the thickness direction. Dispersion relations ... -
Investigation of Spatial Variability of Air Temperature, Humidity and Velocity in Cold Stores by Using Management Zone Analysis
(Ankara Univ, Fac Agr, 2014)The main objective of this research was to determine spatial variability of ambient temperature, relative humidity and air velocity in a cold storage using management zone analysis methods. Ambient temperature, relative ... -
Numerical Modelling and Experimental Validation of a Cold Store Ambient Factors
(Ankara Univ, Fac Agr, 2015)The objective of this study was to analyse air temperature and relative humidity distribution in an experimental cold store fully loaded with apples by using both experimental and numerical (CFD) methods. An unsteady ... -
Energy Consumption of An Experimental Cold Storage
(Scientific Issues Natl Centre Agrarian Sciences, 2012)Energy consumption of an experimental cold storage Was measured for different storage temperatures. Suction temperature and pressure temperature of the compressor and working time of the compressor were determined to reach ... -
Evaluation of cold storage insulation by thermal images analysis
(National Centre for Agrarian Sciences, 2014)Thermal camera is useful tool to check the situation of cold storage insulation envolope and to determine spatial distribution of temperature. In this research, insulation of an experimental cold storage was checked by ... -
Effects of Row Spacing on Growth, Yield and Quality Parameters of Sweet Sorghum
(2017)A two-year field experiment was conducted in Thessaly, Central Greece, in order to evaluate the effect of row spacing on several growth and yield parameters of sweet sorghum. In particular, two row spacings were tested: ... -
Modeling carbon nanotube-based mass sensors using axial vibration and nonlocal elasticity
(Elsevier Science Bv, 2011)In the present study, axial vibration behavior of single-walled carbon nanotube-based mass sensors is studied using nonlocal elasticity theory. The nonlocal constitutive equations of Eringen are used in the formulations. ... -
Designing of cold stores and choosing of cooling system elements
(Asian Network for Scientific Information, 2008)In this study, calculation of cooling load and choosing of the cooling system elements such as compressor, condenser and evaporator were explained for designing of the cold storage. Transmission heat (q1), infiltration ... -
Bir soğuk hava deposunda farklı menfez kanat açılarına göre hava dağılımının hesaplamalı akışkanlar dinamiği ile tahmini
(2016)Araştırmada; soğuk depo içerisinde hava dağılımını sağlayan menfezlerin kanat açıları 0º-0º-0º, 0º-0º45º ve 0º-22.5º-45º olarak kurgulanmış ve elma dolu depo için sıcaklık, hava hızı ve bağıl nemindağılımı hesaplamalı ...
RSS 1.0
