Ara
Toplam kayıt 14, listelenen: 1-10
Adsorption of industrial Acid Red 114 onto Fe3O4@ Histidine magnetic nanocomposite
(Desalination Publ, 2017)
Fe3O4@ Histidine (Fe3O4@ His) magnetic nanocomposite (MNCs) was successfully prepared by simple thermal decomposition method. The final obtained products were characterized by X-ray diffraction (XRD), Fourier transform ...
Comparison of Acid Red 114 Dye Adsorption by Fe3O4 and Fe3O4 Impregnated Rice Husk Ash
(Hindawi Ltd, 2016)
The removal of Acid Red 114 (AR114) dye by adsorption process, using the magnetic nanoparticle (RHA-MNP) which is produced from rice husk ash burned at 300 degrees C and the magnetic nanoparticle (MNP, Fe3O4), was studied. ...
Kinetic and equilibrium study of methylene blue adsorption using H2SO4-activated rice husk ash
(Desalination Publ, 2016)
The objective of this study is to evaluate the performance of H2SO4-activated rice husk ash (ARHA) (burned at different temperatures (300-550 degrees C) as compared to granular activated carbon (GAC) in the removal of ...
Enhancement of Methylene Blue dye adsorption by Fe-Hydroxyapatite composite
(Techno-Press, 2016)
Synthesized hydroxyapatite (Hyd) and Fe-hydroxyapatite (Fe-Hyd) composite were used for the removal of Methylene Blue (MB) from aqueous solutions in this study. The effect of adsorbent amount, pH and initial MB concentration ...
Adsorption of Reactive Blue 222 onto an industrial solid waste included Al(III) hydroxide: pH, ionic strength, isotherms, and kinetics studies
(Desalination Publ, 2015)
In this study, an industrial waste sludge composed of metal hydroxides was used as a low-cost adsorbent for removing a reactive textile dye. Removal of the reactive dye Reactive Blue 222 (RB 222) onto an industrial solid ...
Optimization of methylene blue adsorption by pumice powder
(Techno-Press, 2015)
The main objective of this study is to evaluate adsorptive removal of Methylene Blue (MB) dye from aqueous solution using pumice powder. The effects of pH, adsorption time, agitation speed, adsorbent dose, and dye ...
Photocatalytic degradation of methylene blue by waste ZnO catalyst
(Pamukkale Univ, 2017)
The purpose of this study, the usability of the ZnO content of waste which produces from metal waste recycling industries as a catalyst was investigated for the removal of methylene blue by the photocatalytic oxidation ...
Single and binary adsorption of iron and manganese in synthetic water using activated pumice composites: effect of monovalent and divalent ions, desorption and reuse isotherms
(Desalination Publ, 2017)
Adsorption performance of Fe and Mn, using three different activated pumice composites at varying doses, pH, and the initial metal conditions, was investigated in the single and binary metal systems. Adsorption performance ...
Chloride or sulfate? Consequences for ozonation of textile wastewater
(Academic Press Ltd- Elsevier Science Ltd, 2019)
Ozonation of chloride-rich textile wastewater is a common pretreatment practice in order to increase biodegradability and therefore meet the discharge limits. This study is the first to investigate ozone-chloride/bromide ...
Photocatalytic Decolorization of Two Remazol Dyes Using TiO2 Impregnated Pumice Composite as Catalyst
(Elsevier Science Bv, 2019)
[No Abstract Available]