Ara
Toplam kayıt 10, listelenen: 1-10
Adsorption of industrial Acid Red 114 onto Fe3O4@ Histidine magnetic nanocomposite
(Desalination Publ, 2017)
Fe3O4@ Histidine (Fe3O4@ His) magnetic nanocomposite (MNCs) was successfully prepared by simple thermal decomposition method. The final obtained products were characterized by X-ray diffraction (XRD), Fourier transform ...
Kinetic and equilibrium study of methylene blue adsorption using H2SO4-activated rice husk ash
(Desalination Publ, 2016)
The objective of this study is to evaluate the performance of H2SO4-activated rice husk ash (ARHA) (burned at different temperatures (300-550 degrees C) as compared to granular activated carbon (GAC) in the removal of ...
Enhancement of Methylene Blue dye adsorption by Fe-Hydroxyapatite composite
(Techno-Press, 2016)
Synthesized hydroxyapatite (Hyd) and Fe-hydroxyapatite (Fe-Hyd) composite were used for the removal of Methylene Blue (MB) from aqueous solutions in this study. The effect of adsorbent amount, pH and initial MB concentration ...
Adsorption of Reactive Blue 222 onto an industrial solid waste included Al(III) hydroxide: pH, ionic strength, isotherms, and kinetics studies
(Desalination Publ, 2015)
In this study, an industrial waste sludge composed of metal hydroxides was used as a low-cost adsorbent for removing a reactive textile dye. Removal of the reactive dye Reactive Blue 222 (RB 222) onto an industrial solid ...
Optimization of methylene blue adsorption by pumice powder
(Techno-Press, 2015)
The main objective of this study is to evaluate adsorptive removal of Methylene Blue (MB) dye from aqueous solution using pumice powder. The effects of pH, adsorption time, agitation speed, adsorbent dose, and dye ...
Single and binary adsorption of iron and manganese in synthetic water using activated pumice composites: effect of monovalent and divalent ions, desorption and reuse isotherms
(Desalination Publ, 2017)
Adsorption performance of Fe and Mn, using three different activated pumice composites at varying doses, pH, and the initial metal conditions, was investigated in the single and binary metal systems. Adsorption performance ...
Photocatalytic Decolorization of Two Remazol Dyes Using TiO2 Impregnated Pumice Composite as Catalyst
(Elsevier Science Bv, 2019)
[No Abstract Available]
Manganese adsorption by iron impregnated pumice composite
(Elsevier Science Bv, 2017)
Manganese (Mn) is often present at high concentrations in ground and surface waters. Industrial discharges are also a major source of Mn pollution in the environment. Adsorption is a widely studied technique to abate Mn ...
Synthesis of ZnCl2 Activated Raising Powder of Cotton Fabrics for Acid and Basic Dye Adsorption: A Way to Reuse Cellulosic Wastes for Sustainable Production
(Taylor & Francis Inc, 2022)
In this study, Cl Basic Blue 9 (BB9) and Cl Acid Blue 193 (AB193) dyes were used to investigate the color removal efficiency of the carbon-based adsorbent material, ZnCl2-RP, which was obtained by activating the raising ...
Decolorization potential of reactive dyes by using galvanising industry's waste (aluminum hydroxide sludge) depending on dye chromophore
(Taylor & Francis Ltd, 2022)
The galvanising industry's wastewater treatment facilities generate waste metal hydroxide. These sludges have the potential to be used to remove textile dyes from effluents. In this study, three reactive dyes, which are ...