Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorKaraca, Yüksel
dc.date.accessioned2017-04-20T08:19:30Z
dc.date.available2017-04-20T08:19:30Z
dc.date.issued2008
dc.identifier.urihttps://hdl.handle.net/20.500.11776/246
dc.description.abstractBu çalısmada, ülkemizde yaygın olarak kullanılan in-line damlatıcıya sahip dairesel kesitli, damla sulama borusundaki en uygun lateral uzunluklarının belirlenmesi amacıyla, içine geçik labirent kanallı 20, 25, 33, 40 ve 50 cm damlatıcı aralıklı 15,2 mm (iç çap: 13,4 mm) dıs çapa sahip damla sulama borusu incelenmistir. Damlatıcı özellikleri saptanmıs ve lateral boruda meydana gelen sürtünme kayıpları ölçülmüstür. Elde edilen basınç – debi verileri kullanılarak, hazırlanan bir bilgisayar programı yardımıyla 0,5, 1,0, 1,5 ve 2,0 bar çalısma basınçları ile egimsiz kosullarda, es su dagılımını (Cu) saglayan optimum lateral uzunlukları bulunmustur. Arastırma sonuçlarına göre, 4 L/h’ lik debiyi verecek isletme basıncı 1 bar oldugu kosulda lateral uzunlukları; 20 cm damlatıcı aralıgında 31 m, 25 cm damlatıcı aralıgında 35 m, 33 cm damlatıcı aralıgında 42 m, 40 cm damlatıcı aralıgında 49 m ve 50 cm damlatıcı aralıgında 59 m olarak bulunmustur.en_US
dc.description.abstractIn this study, the optimum lateral length of drip irrigation pipe with the emitter which is widely used in our country was examined. For this aim, the diameter (outside: 15,2 mm and inside: 13,4 mm) having the same in-line type emitter with 20, 25, 33, 40 and 50 cm emitter spacing were used, the technical properties of the emitter were determined and the frictional loss in this lateral was calculated from measured head loss and flow rate. The experimental pressure-flow rate and frictional loss equations were used to calculate the optimum lateral lengths to provide uniformity (namely, Christiansen uniformity constant) at 0,5, 1,0, 1,5 and 2,0 bar operating pressures under flat (non-sloppy) line condition using a computer program, which were made specially for this purpose . The variations of optimum lateral lengths with the diameter of pipes under various operating conditions were determined as a percentage. As a result, it was concluded that the optimum lengths of lateral were found to be 31 m for 20 cm dripper spacing, 35 m for 25 cm dripper spacing, 42 cm for 33 cm dripper spacing, 49 m for 40 cm dripper spacing and 59 m for 50 cm dripper spacing.en_US
dc.language.isoturen_US
dc.publisherNamık Kemal Üniversitesien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectin-line damlatıcıen_US
dc.subjectlateral uzunluğuen_US
dc.subjectdamlatıcı aralığıen_US
dc.subjecteş su dağılımıen_US
dc.subjectişletme basıncıen_US
dc.subjectdamla sulamaen_US
dc.subjectIn-line emitteren_US
dc.subjectlateral lengthen_US
dc.subjectemitter spacingen_US
dc.subjectChristiansen uniformity constanten_US
dc.subjectoperating pressuresen_US
dc.subjectdrip irrigationen_US
dc.titleDamla sulamada dairesel kesitli boruların farklı damlatıcı aralığına göre uzatma mesafelerinin belirlenmesien_US
dc.title.alternativeDetermination of the effect of pipe on the optimum lateral length of circular drip irrigation pipes with the type of different emitter spacingen_US
dc.typemasterThesisen_US
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Tarımsal Yapılar ve Sulama Ana Bilim Dalıen_US
dc.relation.publicationcategoryTezen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster