Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorAkdemir, Serap
dc.date.accessioned2022-05-11T14:47:54Z
dc.date.available2022-05-11T14:47:54Z
dc.date.issued2012
dc.identifier.issn1310-0351
dc.identifier.urihttps://hdl.handle.net/20.500.11776/10570
dc.description.abstractEnergy consumption of an experimental cold storage Was measured for different storage temperatures. Suction temperature and pressure temperature of the compressor and working time of the compressor were determined to reach evaporator set up temperatures. Capacity of compressor, condenser, and evaporator were 10460 kJ/h, 12552 kJ/h, and 10460 kJ/h, respectively. An axial fan located back of the evaporator was used to distribute the cooled air into the cold store. An electrical heater was used to. defrost. Refrigerant was R22. The compressor suction and pressure temperatures varied between 1.8 degrees C-14 degrees C; and 37 degrees C-44 degrees C, respectively. Condenser output temperature changed from 28.8 to 45.5 degrees C. Electrical energy consumption were measured as 0.001 kWh for 5 degrees C, 4 degrees C, and 3 degrees C and 0.003 kWh for 2 degrees C, 0.006 kWh for 1 degrees C, 0.001 kWh for -1 degrees C, 0.109 kWh for -2 degrees C and 0.120 kWh for -3 degrees C. Mean energy consumption of the compressor was 0.035 kWh/degrees C for positive cold storage temperatures (from 5 degrees C to 0 degrees C) and 0.093 kWh/degrees C for negative temperatures (-1 degrees C, -2 degrees C, and -3 degrees C). Working tithe of the compressor was changed from 207 s to 25049 s for test temperatures.en_US
dc.language.isoengen_US
dc.publisherScientific Issues Natl Centre Agrarian Sciencesen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectenergy consumptionen_US
dc.subjectcold storageen_US
dc.subjectrefrigerationen_US
dc.titleEnergy Consumption of An Experimental Cold Storageen_US
dc.typearticleen_US
dc.relation.ispartofBulgarian Journal of Agricultural Scienceen_US
dc.departmentMeslek Yüksekokulları, Teknik Bilimler Meslek Yüksekokulu, Makine ve Metal Teknolojileri Bölümüen_US
dc.authorid0000-0001-5057-174X
dc.identifier.volume18en_US
dc.identifier.issue6en_US
dc.identifier.startpage991en_US
dc.identifier.endpage996en_US
dc.institutionauthorAkdemir, Serap
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.authorwosidAkdemir, Serap/W-3806-2017
dc.identifier.wosWOS:000326315300024en_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster