Determination of the Efficiency of Waste Gas Washing Equipments Used in Jewelery Workshop
Özet
During the processes where acid and cyanide are used in jewelery workshops, waste gasesoriginates that hazardous in terms of human and environmental health and material. It is necessary tocontrol these originated gas flows with suitable methods and equipment in the workshop and convertthem to non-hazardous forms. For this purpose, waste gas washing equipment which can be used byvarious producers in jewelery workshops are produced. In this study, waste gas stream hazardousemissions removal efficiency of a system produced for this purpose was examined and the measures to betaken for the continuous efficiency were mentioned. According to results; it has been determined that thenitric acid emissions and the sulfuric acid emissions originated from the iron / copper solvation processare reduced by 94.5% and 88.3%, respectively, by means of waste gas washing system. It has beendetermined that cyanide emissions are reduced by 98.7% by washing the waste gases from the bombingprocess by means of washing system. According to results, treated toxic gaseous emission concentrationswere below the limit.values of Turkish Industrial Air Pollution Control Regulation (TIAPCR) and Netherlands EmissionGuidelines for Air (NER). Kuyum atölyelerinde asit ve siyanür kullanılan işlemler esnasında, insan ve çevre sağlığı ile malzeme üzerinde zararlı olacak nitelikte atık gazlar ortaya çıkmaktadır. Oluşan bu atık gaz akımlarının, oluştuğu atölye içinde uygun yöntem ve ekipmanlarla kontrol edilmesi ve zararsız hale getirilmesi gerekmektedir. Bu amaçla çeşitli üreticiler tarafından kuyum atölyelerinde kullanılabilecek atık gaz yıkama ekipmanları üretilmektedir. Yapılan çalışmada bu amaçla üretilmiş bir sistemin atık gaz akımı içerisindeki zararlı emisyonları giderme verimi incelenmiş ve verimin sürekliliğinin sağlanması için alınması gereken önlemler belirtilmiştir. Elde edilen sonuçlar incelendiğinde; kullanılan atık gaz yıkama sistemi sayesinde demir/bakır indirme işleminden kaynaklanan nitrik asit emisyonlarının %94,5, sülfürik asit emisyonlarının ise %88,3 oranında giderildiği belirlenmiştir. Patlatma işleminden kaynaklanan atık gazların yıkama sisteminde yıkanması ile siyanür emisyonun ise %98,7 oranında giderildiği tespit edilmiştir. Elde edilen sonuçlara göre arıtılmış toksik gaz emisyonları; Sanayi Kaynaklı Hava Kirliliğinin Kontrolü Yönetmeliği ve Hollanda Hava Emisyon Klavuzu’nda verilen limit değerlerin altında kalmıştır
Cilt
23Sayı
2Bağlantı
https://doi.org/10.17482/uumfd.370347https://app.trdizin.gov.tr/makale/TXpJME5UUTNOdz09
https://hdl.handle.net/20.500.11776/6210
Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Expression Profile of Transcription Factor ELK-1 and ELK-1 Target Genes on Lymphoma-Leukemia Cell Lines
Akalan, Hande; Şirin, Duygu Yaşar (2018)Prognostic molecular markers identified in leukemia are becomingincreasingly important especially in risk stratification and to determine therapy. Inthis study, we investigate the role of ELK-1 transcription factor and its ... -
Properties of an a article in a Bohrium 270 Nucleus under the Generalized Symmetric Woods-Saxon Potential
The energy eigenvalues and the wave functions of an a particle in a Bohrium 270 nucleus have been calculated by solving Schrödinger equation for Generalized Symmetric Woods-Saxon potential. Using the energy spectrum by ... -
Effects of Salt Stress and Inoculation Ratios in Cell Cultures of Rubia tinctorum L.
Nartop, Pınar; Akay, Şeref; Gürel, Aynur (2017)In this study, salt stress was implemented to callus and cell suspension cultures of Rubia tinctorum L. at 100 mM and 200mM concentrations and the effects on fresh and dry weights (g), relative dry weight ratios, and ...