Ara
Toplam kayıt 122, listelenen: 21-30
Drying Behavior of Cultured Mushrooms
(Wiley, 2010)
In this study, the drying behavior of cultured mushrooms with an initial moisture content of 93% (drying basis [d.b.]) was investigated experimentally for different slice thicknesses and drying air temperatures, and the ...
Single Layer Drying Behavior of Apple Slices in a Microwave Dryer
(Trans Tech Publications Ltd, 2011)
In this study, the drying behaviour of single layer apple slices of 5mm thickness in a microwave dryer was investigated experimentally for four different microwave power levels (90 W, 180 W, 360 W and 600 W) and suitability ...
Simulation of Drying Behavior of Cotton Bobbins by a Simultaneous Heat and Mass Transfer Model
(Trans Tech Publications Ltd, 2011)
In this study, the drying process of cotton bobbins for different drying air temperatures has been simulated by a simultaneous heat and mass transfer model. In the model, the mass transfer is assumed to be controlled by ...
Drying Behavior of Polyester Based Yarn Bobbins in a Hot-Air Bobbin Dryer
(Trans Tech Publications Ltd, 2011)
Drying behavior of polyester based yarn bobbins (67% polyester, 33% viscose) was simulated for different drying air temperatures by a simultaneous heat and mass transfer model. In the model, it was assumed that mass transfer ...
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
Evaluation of fly ash and polypropylene in production of composite materials
(2012)
More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
A Review on the Mechanical Modeling of Composite Manufacturing Processes
(Springer, 2017)
The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)
This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...