Bölüm "Fakülteler, Çorlu Mühendislik Fakültesi, Makine Mühendisliği Bölümü" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 89, listelenen: 21-40
-
Effect of particle shape on the wear and friction behavior of particle-reinforced epoxy coatings
(Springer, 2019)Epoxy coatings are increasingly becoming popular choices as barriers against acids and alkali for protection of concrete and metal products. In applications, metal containers are often coated with epoxy-based coatings to ... -
Effect of residual stress on the bending response of L-shaped composite laminates
(Elsevier Sci Ltd, 2020)[No Abstract Available] -
The Effect of the Heat Recovery on Fuel Consumption in the Stenter Machine
(Vinca Inst Nuclear Sci, 2021)In this study, the convective drying process on the stenter machine used natural gas as fire' was examined in terms of energy saving. The fuel consumption in the drying process of wool fabric with and without heat recovery ... -
Effect of thermomechanical processing on the mechanical properties of CuZn10 alloy
(Walter De Gruyter Gmbh, 2022)The effects of thermomechanical processing on the grain size, tensile strength, and strain rate of a CuZn10 alloy were investigated. Microstructures of thermomechanically treated samples were introduced using a scanning ... -
Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron
(Elsevier Science Sa, 2016)Hypereutectic high chromium white cast iron alloys were produced with TiBAl (1-3 wt.%) inoculants. The heat treatments were applied to the samples as 1000 degrees C for 1 and 2 h. The microstructures of the samples were ... -
Effects of compaction pressure on silage fermentation in bunker silo
(Eesti Pollumajandusulikool, 2017)The aim of this research was to determine the effects of compaction pressure on maize silage fermentation under field conditions. The CAT 955 L type work machine was used for the compaction of the material. In this research, ... -
Effects of hot air and vacuum drying methods on drying kinetics and some quality characteristics of traditionally produced couscous in Turkey
(College of Agriculture and Food Science, University of the Philippines Los Banos, 2019)Drying kinetics and changes in some quality properties of couscous were studied to determine optimal drying method and drying temperature. Drying methods using hot air drying (HAD) and vacuum drying (VD) were applied and ... -
Effects of Sintering Temperature on Microstructural Properties of Ni1-xZnxFe2O4 Synthesized by Powder Metallurgy
(Kaunas Univ Tech, 2022)Powder metallurgy (PM) is a modern manufacturing method that allows high-tech materials, alloys and complex shaped parts to be manufactured with precision and almost without the need for finishing operations such as ... -
Energy and exergy analysis and thermo-economic optimization of the ground source heat pump integrated with radiant wall panel and fan-coil unit with floor heating or radiator
(Pergamon-Elsevier Science Ltd, 2020)Current study is aimed at making the most appropriate design considering the dynamic energy, exergy and economic analysis of Ground Source Heat Pumps (GSHP). The energy required to heat and to cool a 200 m(2) office in ... -
ENERGY AND EXERGY ANALYSIS OF RICE STRAW GASIFICATION
(Plapiqui, 2022)In this study, energy and exergy ana-lyzes were performed in the gasification of rice straw pellets prepared in 5 different blends: PRF (reference sample with no additives), PVA3 (rice straw + 3% PVA), PML5 (rice straw + ... -
Estimation of power output and thermodynamic analysis of standard and finned photovoltaic panels
(Bellwether Publishing, Ltd., 2021)This study deals with the estimation of power output and also thermodynamic analysis of two different photovoltaic panels. One of the panels is a standard photovoltaic module without fins (SPV), and the other one is a ... -
Evaluation of fly ash and polypropylene in production of composite materials
(2012)More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ... -
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ... -
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
(Sage Publications Ltd, 2020)In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ... -
Evaluation of Thermal and Drying Characteristics of Dried Hazelnut (Corylus avellana L.) Shell Waste
(Univ Philippines Los Banos, 2022)As a biomass fuel, the hazelnut shell must be milled into sawdust and dried to contain a certain amount of moisture. For this purpose, calorific value, drying rates, thermal values, moisture diffusion, activation energy, ... -
Experimental and numerical investigation of ground heat exchangers in the building foundation
(Pergamon-Elsevier Science Ltd, 2019)The current study proposes a novel method with the experimental and numerical studies for the ground source heat pumps, which are known as environment-friendly and efficient heating & cooling systems to overcome their ... -
Experimental and numerical investigation of heat transfer in a channel with multiple phase change materials (PCMs)
(Elsevier Ltd, 2022)In this study, the thermal performance of an air-phase change material (PCM) unit used in free cooling applications was examined experimentally and numerically by Comsol finite element simulation software. Effects of the ... -
An Experimental and Numerical Investigation of Particle Morphology Effect on the Elasto-plastic Behavior of Particle-filled Composites
(Korean Fiber Soc, 2022)In this study, the influence of particle shapes on the elastoplastic response of composite materials is investigated both experimentally and computationally. Flake, spherical, irregular, and rod type glass particles are ... -
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ... -
An experimental comparison of radiant wall and ceiling cooling system integrated with ground source heat pump and direct expansion fan coil system in a highly glazed office room
(Elsevier Ltd, 2022)Hydronic radiant systems, which provide a thermal comfort environment, come to the fore in different building applications due to their energy saving potential and being integrated with renewable energy systems. The aim ...