Ara
Toplam kayıt 20, listelenen: 11-20
Assessment of CO2Emissions Reduction Based on Different Insulation Materials in Residential Buildings: Example from Turkey
(IOP Publishing Ltd, 2021)
In this study, the reduction of CO2 emissions caused by energy savings due to thermal insulation materials applied to the exterior of buildings was investigated. The study includes the evaluation of four different insulation ...
İmplantasyon Uygulamaları İçin Toz Metalurjisi ile Üretilen Ti-16Nb-4Sn Alaşımının Mikroyapı ve Biyouyumluluk Özelliklerinin İncelenmesi
(2022)
Bu çalışmada, Ti-16Nb-4Sn alaşımları az gözenekli ve çok gözenekli olarak geleneksel toz metalürjisi yöntemi ile üretildi. Sinterlenen numunelerin faz analizleri ve mikroyapılarında meydana gelen değişimler; XRD, optik ...
Toz Metalurjisi ile Üretilen Gözenekli TiZr Alaşımının Mekanik Özellikleri ve Biyouyumluluğu Üzerine Sinterleme Sıcaklığının Etkileri
(2022)
Dünya nüfusunun ortalama yaşam süresi arttıkça implant biyomalzemelerine olan ihtiyaç da artmaktadır. Bu nedenle, bu alandaki araştırmalar son yıllarda artış göstermiştir. Özellikle, gözenekli metaller, ayarlanabilir mekanik ...
INVESTIGATION OF EFFICIENCY OF R717 REFRIGERANT SINGLE STAGE COOLING SYSTEM AND R717/R744 REFRIGERANT CASCADE COOLING SYSTEM
(2021)
This study is an adaptation of ammonia cascade cooling systems using carbon dioxide on ice cream production machinesand includes thermodynamic analysis of R717/R744 cascade refrigeration system with R717 refrigerant ...
AN APPLICATION TO ERROR AND UNCERTAINTY ANALYSIS IN INDUSTRIAL TYPE DRYER EXPERIMENTS
(2021)
In this study, information is given about the driers commonly used in the industry and the experimental errors anduncertainties that will be encountered in the experiments using these driers are tried to be explained by ...
EDİRNE İKLİM ŞARTLARINDA ÇEVRE SICAKLIĞI VE RÜZGAR HIZININ POLİKRİSTAL FOTOVOLTAİK PANEL ÇIKIŞ GÜCÜNE ETKİLERİNİN İNCELENMESİ
(2022)
Bu çalışmada, Edirne ilinde kurulu bir polikristal fotovoltaik panelli güneş enerjisi sisteminin performansının çevre sıcaklığı ve rüzgar hızı ile değişimi araştırılarak, bu unsurların fotovoltaik sistem performansı üzerine ...
Evaluation of feasibility analyses for different hub heights of a wind turbine
(Erol Kurt, 2022)
In this study, techno-economic and environmental feasibility analyses of a wind turbine for different hub connection heights were investigated using RETScreen Expert energy analysis program. Çerkezköy district of Tekirda? ...
4E analysis of an underfloor heating system integrated to the geothermal heat pump for greenhouse heating
(Scientific And Technological Research Council Turkey, 2022)
In this study, 4E (energy, exergy, exergoeconomic, and exergoenvironmental) analysis of an underfloor heating system integrated with the geothermal heat pump of a greenhouse with a usage area of 90 m(2) has been made. When ...
Effect of Zr Concentration on the Microstructure and Mechanical Performance of Porous Ti-Zr System by Powder Metallurgy
(Trans Tech Publications Ltd, 2022)
In this study, porous binary Ti-(x)Zr alloys of nominal Zr contents (x=10, 20 and 30 at. %) with differing porosities were manufactured, using powder metallurgy with compaction conducted under a pressure of 300MPa and ...
Investigation of structural and optical properties of pure ZnO and co-doped ZnO:Al:Mnx (x=1%, 2%, 3%, 5% at.) semiconductor thin films and electrical properties of produced diodes
(Gazi Universitesi, 2023)
In this work, undoped and co-doped ZnO:Al:Mn semiconductor thin films and p-type Si diodes were produced via sol-gel technique method. The morphological and optical properties of the produced thin films were investigated ...