Güncel Gönderiler: Çorlu Mühendislik Fakültesi Koleksiyonu
Toplam kayıt 990, listelenen: 121-140
-
Experimentally investigating the usability of waste interlocking concrete paver in the plant-mix base layer
(Gazi Univ, Fac Engineering Architecture, 2022)Due to the growth in the construction industry in recent years, the need for natural aggregates has increased. Due to this increase in need, the search for alternative materials to natural aggregate has begun. Construction ... -
Tunneled Uncuffed Pigtail Drainage Catheter Placement in Patients with Refractory Ascites or Pleural Effusion: A Single-Center Experience
(Springer, 2022)Purpose No evidence exists to support the use of tunneled non-cuffed pigtail drainage catheters in patients with refractory ascites or pleural effusion. The purpose of this study was to determine the feasibility of non-cuffed ... -
Prediction of Undrained Shear Strength by the GMDH-Type Neural Network Using SPT-Value and Soil Physical Properties
(MDPI, 2022)This study presents a novel method for predicting the undrained shear strength (c(u)) using artificial intelligence technology. The c(u) value is critical in geotechnical applications and difficult to directly determine ... -
The impact of COVID-19 pandemic in medical waste amounts: a case study from a high-populated city of Turkey
(Springer, 2022)In this study, the amount of medical waste generated in a high-populated city in Turkey between January 2018 and August 2021 was evaluated, and the effect of the COVID-19 pandemic on waste amounts and waste production rate ... -
Oxidative stress in neonatal lambs and its relation to health status and passive colostral immunity
(Elsevier, 2022)Oxidative stress (OS) related to birth in ruminants may increase susceptibility to diseases. However, information about the physiological changes related to OS in lambs is limited. This study was designed to evaluate changes ... -
Development of a New Fabric Grading System with a Demerit Control Chart in the Apparel Industry
(Inst Chemical Fibres, 2021)Fabric defects are usually manually identified by quality control staff in the apparel industry. Control charts are an appropriate tool to achieve this goal. In this study, knitted fabric often used in an apparel factory ... -
The Effect of Linen and Linen Blends on the Comfort Properties of Bedding Fabrics
(Taylor & Francis Inc, 2021)In this study, the effect of linen and linen blends on the comfort properties of bedding fabrics was investigated. Therefore, 10 different fabric types were produced by using the same warp (100% cotton) and different weft ... -
Effect of Magnetite Nanoparticles on Cement Based Composite
(Serban Solacolu Foundation, 2021)There has been a rapid increase in interest in nanotechnology and nano particles. Nanotechnology has been increasingly brought into the study of cement-based materials in the recent years. Adding nanosized particles in ... -
Producing garment based multichromic smart sensors through dyeing cotton fabrics with chromic dyes
(Springer Science and Business Media B.V., 2022)The importance of technical, functional and smart textiles with high added value is gradually increasing. One class of smart textiles is chromic materials. Chromism is a reversible change in color caused by certain factors ... -
Production and analysis of electrospun pa 6,6 and pva nanofibrous surfaces for filtration
(Inst. Nat. Cercetare-Dezvoltare Text. Pielarie, 2021)Electrospun nanofibrous surfaces were produced by using two different polymers (PA 6,6 and PVA) at three different levels of polymer feeding rate (0.2, 0.6 and 1.0 ml/h, respectively) and three different levels of production ... -
Reducing steaming times in the printing of nylon/elastane blend fabrics via chemical modification
(Lukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres, 2021)Nylon fibres are commonly used in blends with elastane. One of the problems encountered in the printing of nylon/elastane blend fabrics is the necessity of long steaming times for fixation, which causes an increase in ... -
Cut Order Planning Optimisation in the Apparel Industry
(Inst Chemical Fibres, 2020)Nowadays, apparel businesses have to cut down on their costs in order to ensure the continuity of their activities and to expand them. Fabric costs cover about 50-60% of production costs. In this study, for the minimisation ... -
Evaluating silver-plated nylon (Ag/PA66) e-textiles for bioelectrical impedance analysis (BIA) application
(Iop Publishing Ltd, 2020)Bioelectrical impedance analysis (BIA) is an established method for assessing integrity of biotissue. Adapting BIA as a diagnostic tool to monitor electrophysiological activity gives rise to evidence-based objective ... -
In Vitro Evaluation of Electrospun Polysaccharide Based Nanofibrous Mats as Surgical Adhesion Barriers
(Ege Univ, 2020)Post-operative adhesions are one of the most important problems faced by patients and surgeons. In this study, nanofibrous mats were produced as novel surgical adhesion barrier from polysaccharide-based polymers, hyaluronic ... -
Dyeing of Cotton Fabric with Natural Dyes without Mordant Usage Part I: Determining the Most Suitable Dye Plants for Dyeing and UV Protective Functionalization
(Korean Fiber Soc, 2020)Natural dyes are gaining importance in textile dyeing applications in recent years due to the fact many synthetic dyes are carcinogenic, mutagenic, and allergic. In this study, cotton knitted fabrics were dyed with extract ... -
An investigation of the effect of delivery speed and nozzle air pressure on viscose yarn properties in Vortex Spinning
(Chamber of Textile Engineers, 2020)In this study, 100% viscose yarns were spun at different delivery speed and nozzle air pressure values (within a range of 300-450 m/min and 0.46-0.58 MPa, respectively) by using Murata Vortex spinning system (MVS). Then, ... -
Out-of-plane auxetic nonwoven as a designer meta-biomaterial
(Elsevier, 2020)Biomaterials are porous and three-dimensional (3D) templates, which are used as biological substitutes in tissue engineering. Targeting the optimal design of biomaterials requires a synergy between mechanical, porous, mass ... -
Obtaining Colored Patterns on Wool Fabric via Chitosan Application by Printing Prior to Dyeing
(Taylor & Francis Inc, 2020)Chitosan is the second most abundant polysaccharide in nature after cellulose and has been extensively used in cosmetics, food and environmental protection, and material sciences. It has also many different application ... -
Comparison of the Physical and Handle Properties of the Fabrics Produced from Wool and Mohair
(Taylor & Francis Inc, 2021)In this study, the differences of the fabric properties produced from wool and mohair fibers were investigated. By using 100% wool yarns and 100% mohair yarns separately in warp direction and the same yarns in the weft ... -
Comfort-Related Properties of Double-Layered Woven Car Seat Fabrics
(Sciendo, 2021)Seat upholstery fabrics for vehicles are crucial products as technical textiles in motor vehicles make up approximately 15% of the total manufactured technical textiles worldwide and more than 50% of the production belongs ...