Ara
Toplam kayıt 862, listelenen: 731-740
The effect of core-sheath proportion on the characteristics of hollow yarns: part I mechanical properties
(Taylor and Francis Ltd., 2018)
In the scope of this study, core yarns in the yarn count of 59 tex were produced by using cotton, viscose, wool, and polyester fibers in the sheath and different ratios of polyvinyl alcohol (PVA) in the core. After completion ...
Design of a real-sized composite drive shaft and critical points from beginning to end
(Applied Mechanics Laboratory, 2020)
In this study, the replacement of a metal drive shaft by a composite counterapart was investigated. The drive shaft considered here is a thin walled tube with an internal diameter of 60 mm and a length of 1200 mm. These ...
Statistical analysis of circular knitting fabric defects with control charts
(Chamber of Textile Engineers, 2018)
One of the main objectives of all sectors of production nowadays is to increase the production quality. Quality control practices are an activity performed by fabric producers at the end of each production process. In this ...
A novel approach for composite wear plate fabrication by using vertical centrifugal casting
(Kauno Technologijos Universitetas, 2018)
A novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal ...
Sigmoid based PID controller implementation for rotor control
(Institute of Electrical and Electronics Engineers Inc., 2015)
This paper presents a sigmoid based variable coefficient PID (SBVC-PID) controller design for Twin Rotor MIMO System (TRMS). The proposed SBVC-PID controller dynamically changes controller coefficients according to a ...
Analysis of QoE key factors in IPTV systems: Channel switching
(2011)
The usage of Internet Protocol TV (IPTV) deployments in the consumer electronics market is growing very popularly in recent years. In IPTV systems, Quality of Experience (QoE) is very critical factor for end-user satisfaction. ...
Using ahp and topsis to evaluate welding processes for manufacturing plain carbon stainless steel storage tank
(International OCSCO World Press, 2015)
Purpose: In the plain carbon stainless steel storage tank manufacturing industry, there are many types of welding processes used. When selecting the most appropriate welding process is usually done intuitively by the ...
Computer Aided Design of PID Control of Pulse DC Sintering System
(Institute of Electrical and Electronics Engineers Inc., 2019)
Pulse DC sintering (PDCS) systems, an effective way of producing sintered materials, are complex systems. They need to be modelled both electrically and thermally. Such a system can be controlled manually or automatically. ...
Research on the fire endurance of the silica sand membrane
(Institute of Physics Publishing, 2019)
In this study, the fire endurance, density, low-temperature deflection, penetration and ring-ball method tests of the membrane produced throughout the mixing of Bitumen, IPP (isotactic polypropylene), LDPE (Low-density ...
Job and personnel assessment in the apparel industry using fuzzy logic
(Lukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres, 2014)
In this study, a new approach to job and personnel assessment for the apparel industry is presented. The purpose of this new approach is to evaluate both qualitative and quantitative data at the same time. For this purpose, ...