Ara
Toplam kayıt 862, listelenen: 391-400
Simulation of Drying Behavior of Cotton Bobbins by a Simultaneous Heat and Mass Transfer Model
(Trans Tech Publications Ltd, 2011)
In this study, the drying process of cotton bobbins for different drying air temperatures has been simulated by a simultaneous heat and mass transfer model. In the model, the mass transfer is assumed to be controlled by ...
Drying Behavior of Polyester Based Yarn Bobbins in a Hot-Air Bobbin Dryer
(Trans Tech Publications Ltd, 2011)
Drying behavior of polyester based yarn bobbins (67% polyester, 33% viscose) was simulated for different drying air temperatures by a simultaneous heat and mass transfer model. In the model, it was assumed that mass transfer ...
A Review on the Mechanical Modeling of Composite Manufacturing Processes
(Springer, 2017)
The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)
This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...
Wear behavior of iron boride coating on AISI 4140
(Maik Nauka/Interperiodica/Springer, 2016)
A new paste technique was established for making boronising coatings. This method gave iron boride coatings a unique wear and tear property something that was tested as a microstructural feature. The coats were acquired ...
Failure Behavior of Corrugated Core Panel Under Out-Of-Plane Loading
(Aalborg Univ Press, 2015)
The aim of this study is to investigate the failure behaviour of a panel with a novel corrugated core design under out-of-plane loading conditions. AS4/8552 prepreg system was used for both facesheet and core material and ...
Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron
(Elsevier Science Sa, 2016)
Hypereutectic high chromium white cast iron alloys were produced with TiBAl (1-3 wt.%) inoculants. The heat treatments were applied to the samples as 1000 degrees C for 1 and 2 h. The microstructures of the samples were ...
Finite element modelling of crackable connecting rods at fracture splitting process
(Kaunas Univ Technol, 2015)
In this study crack propagation analysis of impulsively loaded connecting rods with different microstuctures namely perlitic, bainitic, tempered martensitic were studied numerically for evaluation of fracture parameters. ...
Experimental and numerical investigation of ground heat exchangers in the building foundation
(Pergamon-Elsevier Science Ltd, 2019)
The current study proposes a novel method with the experimental and numerical studies for the ground source heat pumps, which are known as environment-friendly and efficient heating & cooling systems to overcome their ...