Ara
Toplam kayıt 688, listelenen: 331-340
Investigation of Drying Kinetics of Zucchini using Microwave Energy
(2017)
Bu çalışmada mikrodalga konveyör kurutucu kullanarak kabak dilimlerinin kuruma davranışı araştırılmıştır. Kuruma deneyleri 5 mm, 10 mm ve 15 mm dilim kalınlıklarında, 1,5 kW ve 2,1 kW güçlerinde gerçekleştirildi. Elde ...
The Effect of Fouling on the Baffle Spacing of a Shell and Tube Heat Exchanger
(2020)
In this study, shell-side fouling of the shell and tube heat exchanger(STHE) designed for a textile firm was examined. The economic baffle spacing wasdetermined for clean and fouled conditions. The energy and pressure loss ...
İNCE CİDARLI BASINÇLI TÜPLERİN SONLU ELEMANLAR YÖNTEMİYLE ANALİZİ
(Pamukkale Univ, 2008)
Bu çalısmada ince cidarlı basınçlı tüplerde ASTM standartlarında belirtilen iki farklı çelik için basınç etkisi
altında gerilme analizi yapılmıstır. ki boyutlu ve üç boyutlu sonlu elemanlar modelleri Ansys 9.0 ...
İnce cidarlı basınçlı tüplerin sonlu elemanlar yöntemiyle analizi
(2008)
Bu çalışmada ince cidarlı basınçlı tüplerde ASTM standartlarında belirtilen iki farklı çelik için basınç etkisi altında gerilme analizi yapılmıştır. ki boyutlu ve üç boyutlu sonlu elemanlar modelleri Ansys 9.0 yardımıyla ...
Forced vibration analysis of functionally graded beams using nonlocal elasticity
(Elsevier Sci Ltd, 2013)
A forced vibration analysis of functionally graded (FG) nanobeams is considered based on the nonlocal elasticity theory. The solution is obtained by using Navier method for various shear deformation theories. The material ...
Three dimensional mechanical buckling of FG plates with general boundary conditions
(Elsevier Sci Ltd, 2013)
The mechanical buckling analysis of rectangular functionally graded plates under different axial loadings is considered. The analysis is based on the small strain elasticity theory with different boundary conditions. The ...
Three dimensional shear buckling of FG plates with various boundary conditions
(Elsevier Sci Ltd, 2013)
In this paper, the buckling of functionally graded plates under shear are considered for various boundary conditions. The buckling results obtained by using Ritz method based on the three-dimensional linear elasticity ...
Determination of optimum operating conditions and simulation of drying in a textile drying process
(Taylor & Francis Ltd, 2013)
In this study, drying behavior of viscose yarn bobbins was investigated experimentally to specify the optimum drying conditions and a drying model was proposed for simulation of drying. The experiments were conducted in a ...
MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, 2014)
The plasma transferred arc (PTA) process was used for developing wear resistance of AISI 430 steel substrate. Appropriate quantities of FeCrC, FeW and FeTi powders were combined to create conditions that synthesized M7C3 ...
Microwave Drying Behaviour of Tomato Slices
(Sage Publications Ltd, 2013)
In this study, microwave drying behaviour of apple slices was investigated experimentally to determine the effect of microwave power on drying, energy consumption and colour quality. Microwave drying behaviour was simulated ...