Ara
Toplam kayıt 627, listelenen: 551-560
Computer Aided Design of PID Control of Pulse DC Sintering System
(Institute of Electrical and Electronics Engineers Inc., 2019)
Pulse DC sintering (PDCS) systems, an effective way of producing sintered materials, are complex systems. They need to be modelled both electrically and thermally. Such a system can be controlled manually or automatically. ...
Job and personnel assessment in the apparel industry using fuzzy logic
(Lukasiewicz Research Network - Institute of Biopolymers and Chemical Fibres, 2014)
In this study, a new approach to job and personnel assessment for the apparel industry is presented. The purpose of this new approach is to evaluate both qualitative and quantitative data at the same time. For this purpose, ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...
Investigation of drying kinetics of viscose yarn bobbins
(2011)
This study is concerned with the investigation of the suitability of several empirical and semi-empirical drying models available in the literature to define drying behavior of viscose yarn bobbins. For this purpose, ...
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)
The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ...
A Microcontroller Implementation of Hindmarsh-Rose Neuron Model-Based Biological Central Pattern Generator
(Institute of Electrical and Electronics Engineers Inc., 2019)
Central Pattern Generator (CPG) has an important role in controlling the locomotion part of the animals. Bio-inspired Central Pattern Generators can find application areas in robotic and control applications. FPGA ...
Flow optimization in a microchannel with vortex generators using genetic algorithm
(Elsevier Ltd, 2022)
In this study, delta winglet-type vortex generators, widely used in conventional macro channels and proven to be effective, are used in microchannels to increase their heat transfer capacities. The effects of vortex ...
Photo(Catalytic) oxidation processes for the removal of natural organic matter and contaminants of emerging concern from water
(Springer Verlag, 2019)
Natural organic matter (NOM) is a heterogeneous complex of organic materials and is ubiquitous in natural aquatic systems. The amount of NOM in the environment is continuously increasing because of global warming and/or ...
Effect of boundary condition on the cyclic response of I-shaped steel columns: Two-story subassemblage versus isolated column tests
(Wiley, 2022)
Recent studies on isolated steel columns under combined axial load and cyclic lateral drift showed that the column response is affected by the boundary condition. To consider more realistic boundary conditions of first-story ...