Ara
Toplam kayıt 128, listelenen: 51-60
Synthesis of magnetite iron pumice composite for heterogeneous Fenton-like oxidation of dyes
(Techno-Press, 2020)
The removal of two dyes, namely Methylene Blue (MB) and Reactive Brillant Red (RR) from aqueous solution was investigated using magnetite iron coated pumice (MIP) composite in the Fenton-like oxidation process. A weight ...
Developments in membrane bioreactor technologies and evaluation on case study applications for recycle and reuse of miscellaneous wastewaters
(Elsevier, 2021)
Membrane bioreactor (MBR) systems are developed as an alternative technology to conventional activated sludge systems. In these systems, the final settling requirement in the conventional activated sludge process is ...
Recycling of Coal Ash as A Building Material Via A Stabilization/Solidification Method
(Global Network Environmental Science & Technology, 2013)
This study examines stabilization/solidification (S/S) techniques for coal ash/cement systems that involve the production of construction products while minimizing contamination and recycling the coal ash (CA). In these ...
Experimental investigation and pseudoelastic truss model for in-plane behavior of corrugated sandwich panels with polyurethane foam core
(Elsevier Science Inc, 2021)
Sandwich panels are commonly used in facades and the roofs of industrial buildings due to their well-known advantages. However, there is limited data about the in-plane behavior of the panels. Hence, this paper aimed to ...
Planning experience of Hermann Jansen in gaziantep city during 1930s
(Peter Lang AG, 2019)
The establishment of the Republican regime in 1923 in the history of Turkish architecture indicates an important starting/turning point in our history consciousness. In the mentioned period, a new nation-state were formed ...
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
Evaluation of fly ash and polypropylene in production of composite materials
(2012)
More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
Effect of mechanical alloying on FeCrC reinforced Ni alloys
(Carl Hanser Verlag, 2016)
Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites ...
Effect of TiBAl inoculation on abrasive wear resistance of high Cr white cast iron
(Carl Hanser Verlag, 2019)
High chromium white cast iron (HCrWCI) is generally used in applications requiring superior wear resistance. The alloys were inoculated with 1-3 wt.-% TiBAl to rearrange the crystallography of the carbides. The alloys were ...