Ara
Toplam kayıt 117, listelenen: 51-60
Evaluation of fly ash and polypropylene in production of composite materials
(2012)
More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
Effect of mechanical alloying on FeCrC reinforced Ni alloys
(Carl Hanser Verlag, 2016)
Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites ...
Effect of TiBAl inoculation on abrasive wear resistance of high Cr white cast iron
(Carl Hanser Verlag, 2019)
High chromium white cast iron (HCrWCI) is generally used in applications requiring superior wear resistance. The alloys were inoculated with 1-3 wt.-% TiBAl to rearrange the crystallography of the carbides. The alloys were ...
Effect of heat treatment on the wear behavior of GX200Cr13Ni6WMoMn
(Carl Hanser Verlag, 2019)
The effect of cryogenic treatment on the microstructure, hardening behavior and wear resistance of subcritical treated GX200Cr13Ni6WMoMn was investigated. The specimens were improved for thermal shock resistance by having ...
Ultra-low density foam concrete production using electrolyzed water
(ASTM International, 2022)
With the development of foam concrete production technology, its usage area is increasing day by day. In this study, foam concrete was produced by using electrolyzed water to solve the problem of setting and low early-age ...
Effect of different rotational speeds on mechanical and metallurgical properties of friction welded dissimilar steels
(Carl Hanser Verlag, 2018)
In this study, effect of rotational speed on the characteristic microstructure and mechanic properties of the AISI 1030/AISI 420 stainless steel couple welded by friction welding method was experimentally investigated. The ...
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
(Carl Hanser Verlag, 2019)
Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ...
Designing attacks for SMTP servers
(C R L Publishing Ltd, 2011)
Electronic mail is today's most widely used method of communication. In recent years, if e-mail had not been there, communication would not have been possible. Because of SMTP (Simple Mail Transfer Protocol) is an old ...
Hydroforming analysis of exhaust pipe connectors
(Carl Hanser Verlag, 2020)
In this work, a hydroforming analysis of an exhaust pipe clamp adaptor made of galvalume steel was performed. Deformation and failure of galvalume exhaust pipe connectors and its coatings via the hydroforming process were ...