Ara
Toplam kayıt 778, listelenen: 351-360
Assessing wind energy potential of Turkey via vectoral map of prevailing wind and mean wind of Turkey
(Springer Wien, 2020)
In this study, the most detailed prevailing wind and average wind velocity maps of Turkey on a topographical layer were prepared in terms of the wind energy potential. Thus, the areas with high wind potential have also ...
Application of Timoshenko Beam-Column Theory in Data Correction for Steel Beam-Column Testing
(Asce-Amer Soc Civil Engineers, 2020)
A recent cyclic test program evaluated the performance of steel wide-flange columns under axial loads and lateral drifts; the specimens had either fixed-fixed or fixed-rotating boundary conditions. For both cases, the ...
Experimental investigation and pseudoelastic truss model for in-plane behavior of corrugated sandwich panels with polyurethane foam core
(Elsevier Science Inc, 2021)
Sandwich panels are commonly used in facades and the roofs of industrial buildings due to their well-known advantages. However, there is limited data about the in-plane behavior of the panels. Hence, this paper aimed to ...
Vibration Analysis of Inclusion Reinforced Composite Square Plates under Various Boundary Conditions
(Sage Publications Ltd, 2009)
The vibration behavior of E-glass epoxy cross-ply laminated plates containing unidirectionally aligned inclusions was studied under different boundary conditions by using first-order shear deformation theory (FSDT). The ...
Drying Behavior of Cultured Mushrooms
(Wiley, 2010)
In this study, the drying behavior of cultured mushrooms with an initial moisture content of 93% (drying basis [d.b.]) was investigated experimentally for different slice thicknesses and drying air temperatures, and the ...
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
Evaluation of fly ash and polypropylene in production of composite materials
(2012)
More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)
This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...