Ara
Toplam kayıt 93, listelenen: 11-20
Simulation and thermodynamic analysis of a hot-air textile drying process
(Taylor & Francis Ltd, 2015)
This paper is concerned with the simulation of drying behavior of wool yarn bobbins and also determination of the optimum operating conditions by using thermodynamic analysis. Firstly, experimental drying behavior of wool ...
Compaction Pressure and Density Profile in Pile-Type Silos
(Corvinus Univ Budapest, 2019)
The main aim of this study is to investigate the compaction pressure and density profile, and to determine the effectiveness of the compaction process applied to the pile-type silos. Chopped material was compacted into a ...
Selected Mechanical Properties and Bruise Susceptibility of Nectarine Fruit
(Taylor & Francis Inc, 2012)
This research was conducted to evaluate some mechanical properties and bruise susceptibility of nectarine (Prunus persica variety). Compression and impact tests were conducted to determine the mechanical properties and the ...
Vibration Analysis of Inclusion Reinforced Composite Square Plates under Various Boundary Conditions
(Sage Publications Ltd, 2009)
The vibration behavior of E-glass epoxy cross-ply laminated plates containing unidirectionally aligned inclusions was studied under different boundary conditions by using first-order shear deformation theory (FSDT). The ...
Drying Behavior of Cultured Mushrooms
(Wiley, 2010)
In this study, the drying behavior of cultured mushrooms with an initial moisture content of 93% (drying basis [d.b.]) was investigated experimentally for different slice thicknesses and drying air temperatures, and the ...
Suitability of drying models in defining hotair drying behaviour of polyester based yarn bobbins
(2011)
In this study, the suitability of several empirical and semi-empirical drying models available in the literature to define drying behaviour of polyester based yarn bobbins has been investigated. For this purpose, firstly, ...
Evaluation of fly ash and polypropylene in production of composite materials
(2012)
More than 10 million tons of fly ash produced in power plants and polypropylene wastes cause environmental pollution in Turkey. Not only the environmental problems they create, but also the fact that demand for raw material ...
A software for calculation of optimum conditions for cotton, viscose, polyester and wool based yarn bobbins in a hot-air bobbin dryer
(2012)
In this study, a software has been developed to predict the optimum drying conditions of viscose, wool, polyester and cotton based yarn bobbins for drying in a pressurized hot air dryer. For this purpose, firstly, a suitable ...
3D finite element model for predicting manufacturing distortions of composite parts
(Sage Publications Ltd, 2016)
A 3D finite element model has been developed for predicting manufacturing distortions of fibre-reinforced thermosetting composite parts. The total curing process is divided into three steps that correspond to the states ...
Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal
(Elsevier Science Sa, 2015)
This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 ...