Ara
Toplam kayıt 122, listelenen: 91-100
Design of a real-sized composite drive shaft and critical points from beginning to end
(Applied Mechanics Laboratory, 2020)
In this study, the replacement of a metal drive shaft by a composite counterapart was investigated. The drive shaft considered here is a thin walled tube with an internal diameter of 60 mm and a length of 1200 mm. These ...
A novel approach for composite wear plate fabrication by using vertical centrifugal casting
(Kauno Technologijos Universitetas, 2018)
A novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal ...
Research on the fire endurance of the silica sand membrane
(Institute of Physics Publishing, 2019)
In this study, the fire endurance, density, low-temperature deflection, penetration and ring-ball method tests of the membrane produced throughout the mixing of Bitumen, IPP (isotactic polypropylene), LDPE (Low-density ...
Micromechanical modeling of particulate-filled composites using X-ray computed tomography
(DEStech Publications Inc., 2017)
Glass fillers with different shape and mass fractions were considered to demonstrate the wide range of applicability of micro-CT imaging. It is shown that micro-CT technique can be used to create realistic RVEs for two-phase ...
Experimental and numerical study of the tool-part interaction in flat and double curvature parts
(European Conference on Composite Materials, ECCM, 2016)
A numerical model is developed to predict the process induced deformations of continuous fibre reinforced plastic plates which is made of AS4/8552 (Carbon fibre/epoxy) prepregs. In this way, Manufacturing costs can be ...
Investigation of drying kinetics of viscose yarn bobbins
(2011)
This study is concerned with the investigation of the suitability of several empirical and semi-empirical drying models available in the literature to define drying behavior of viscose yarn bobbins. For this purpose, ...
Evaluation of glass geometry on deformation behavior particulate-filled composite materials using X-ray computed tomography
(DEStech Publications Inc., 2017)
The deformation behavior of epoxy reinforced with different shapes and content of glass fillers was investigated through combination of X-ray computed tomography and 3D digital image correlation. Spherical, flake and rod ...
A review of new technologies in valve systems of internal combustion engines and their effects
(Institute of Physics Publishing, 2019)
Efficient use of energy is becoming increasingly crucial due to global warming and depleting fossil fuel sources. Automotive manufacturers aim for fuel economy, reduction of exhaust emissions, durability, volume and weight ...
Flow optimization in a microchannel with vortex generators using genetic algorithm
(Elsevier Ltd, 2022)
In this study, delta winglet-type vortex generators, widely used in conventional macro channels and proven to be effective, are used in microchannels to increase their heat transfer capacities. The effects of vortex ...
Evaluation of Thermal and Drying Characteristics of Dried Hazelnut (Corylus avellana L.) Shell Waste
(Univ Philippines Los Banos, 2022)
As a biomass fuel, the hazelnut shell must be milled into sawdust and dried to contain a certain amount of moisture. For this purpose, calorific value, drying rates, thermal values, moisture diffusion, activation energy, ...