Ara
Toplam kayıt 113, listelenen: 61-70
Determination of some drying parameters of carrot dried using microwave method
(TUBITAK, 2020)
In this study, moisture content, drying time, the diffusion coefficient, activation energy, drying rate, drying efficiency and the energy consumed during the drying of carrot were determined by using the designed microwave ...
Experimental and numerical study on the thermoforming process of amorphous thermoplastic polymers
(Carl Hanser Verlag, 2019)
Thickness distribution has an important impact on the quality of thermoformed products. It has significant effects not only on durability but also on the oxygen and gas transmission rate of thermoformed packaging products. ...
Development of a Prototype Machine Shop Safety System for Vocational Training
(Gazi Univ, 2015)
In this research, a sample of machine shop safety automation was designed in order to prevent occupational accidents taking place in machine shop environments. The developed prototype system is a special occupational safety ...
Investigation of the Performance of a Hybrid Dryer Designed for the Food Industry
(Mdpi, 2019)
In this study, a microwave energy conveyor dryer with the support of solar energy was researched with respect to its usability in the food industry and its short drying time and low energy requirements. The hot air produced ...
Vibration analyses of FGM plates with in-plane material inhomogeneity by Ritz method
(Elsevier Sci Ltd, 2012)
In this study, functionally graded plates which the properties of material varying through the in-plane direction is considered. The analysis is based on a five-degree-of-freedom shear deformable plate theory with different ...
Energy and exergy analysis and thermo-economic optimization of the ground source heat pump integrated with radiant wall panel and fan-coil unit with floor heating or radiator
(Pergamon-Elsevier Science Ltd, 2020)
Current study is aimed at making the most appropriate design considering the dynamic energy, exergy and economic analysis of Ground Source Heat Pumps (GSHP). The energy required to heat and to cool a 200 m(2) office in ...
Effect of residual stress on the bending response of L-shaped composite laminates
(Elsevier Sci Ltd, 2020)
[No Abstract Available]
Influences of out-of-plane fiber waviness on the curved beam strength of glass fiber composite laminates
(Pamukkale Univ, 2020)
In-plane and out-of-plane waviness are inevitable defects in parts that have curved sections made of continuous fiber-reinforced composites. These defects can be located in the micro, meso (ply level) and macroscale (part ...
Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying
(Consejo Superior Investigaciones Cientificas-Csic, 2020)
The Fe-based Ti+Ni3Al+Al2O3 powder mixture is mechanically alloyed in a Spex ball mill. Composites with Fe-based Ti+Ni3Al+Al2O3 addition were produced at 1000 degrees C sintering temperature for 1 h sintering time. The ...
Evaluation of sandwich panels with composite tube-reinforced foam core under bending and flatwise compression
(Sage Publications Ltd, 2020)
In some applications such as roofs and walls, it is important to supply low thermal conductivity and high bending stiffness to structures. Generally, foam materials are preferred, which have low thermal conductivity. ...