Ara
Toplam kayıt 106, listelenen: 101-106
Evaluation of single-channel speech enhancement algorithms by using objective quality and intelligibility measures
(Institute of Electrical and Electronics Engineers Inc., 2018)
In this study, single-channel speech enhancement algorithms were evaluated with objective quality and objective intelligibility measures using Turkish speech database. The clean 30 sentences from the METU database are ...
Quantifying the delamination of L-shaped composite laminates under low velocity impact using x-ray computed tomography
(DEStech Publications Inc., 2018)
Low velocity impact response and failure behavior of L-shaped composite laminates were investigated. The composite laminates with variable thickness, stacking sequences, and corner radius were manufactured using autoclave ...
An investigation on the effect of bottom layer material on the voltage output of a piezoelectric smart woven structure
(Ege Universitesi, 2018)
In this work, the voltage output of a 2-dimensional (2D) woven fabric produced by using polyvinylidene fluoride-based (PVDF) piezoelectric filaments into a plain woven fabric structure was studied. PiezoelectricPVDF filaments ...
The effect of core-sheath proportion on the characteristics of hollow yarns: part I mechanical properties
(Taylor and Francis Ltd., 2018)
In the scope of this study, core yarns in the yarn count of 59 tex were produced by using cotton, viscose, wool, and polyester fibers in the sheath and different ratios of polyvinyl alcohol (PVA) in the core. After completion ...
Statistical analysis of circular knitting fabric defects with control charts
(Chamber of Textile Engineers, 2018)
One of the main objectives of all sectors of production nowadays is to increase the production quality. Quality control practices are an activity performed by fabric producers at the end of each production process. In this ...
A novel approach for composite wear plate fabrication by using vertical centrifugal casting
(Kauno Technologijos Universitetas, 2018)
A novel approach of wear plate fabrication by vertical centrifugal casting was proposed and demonstrated in this paper. Wear plates were reinforced by the addition of M7C3 carbide particles during vertical centrifugal ...